1 / 12

ECE 4110– Sequential Logic Design

ECE 4110– Sequential Logic Design. Lecture #23 Agenda Latches and Flip-Flops Review Announcements HW #11assigned. Latches. Latches - we’ve learned all of the VHDL syntax necessary to describe sequential storage elements - Let’s review where sequential devices come from

gazit
Télécharger la présentation

ECE 4110– Sequential Logic Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 4110– Sequential Logic Design Lecture #23 • Agenda • Latches and Flip-Flops Review • Announcements • HW #11assigned.

  2. Latches • Latches- we’ve learned all of the VHDL syntax necessary to describe sequential storage elements- Let’s review where sequential devices come from • SR Latch- To understand the SR Latch, we must remember the truth table for a NOR Gate AB F 00 1 01 0 10 0 11 0

  3. Latches • SR Latch- when S=0 & R=0, it puts this circuit into a Bi-stable feedback mode where the output is either:Q=0, Qn=1 Q=1, Qn=0AB FAB F 00 1 (U2) 00 1 (U1) 01 0 01 0 (U2) 10 0 (U1) 10 0 11 0 11 0 0 0 0 1 1 0 0 1 1 0 0 0

  4. Latches • SR Latch- we can force a known state using S & R:Set (S=1, R=0)Reset (S=0, R=1) AB FAB F 00 1 (U1) 00 1 (U2) 01 0 01 0 (U1) 10 0 (U2) 10 0 11 0 (U2) 11 0 (U1) 0 1 1 0 0 1 1 0 0 1 1 0

  5. Latches • SR Latch- we can write a Truth Table for an SR Latch as followsS R Q Qn . 0 0 Last Q Last Qn - Hold 0 1 0 1 - Reset 1 0 1 0 - Set 1 1 0 0 - Don’t Use- S=1 & R=1 forces a 0 on both outputs. However, when the latch comes out of this state it is metastable. This means the final state is unknown.

  6. Latches • S’R’ Latch- we can also use NAND gates to form an inverted SR LatchS’ R’ Q Qn . 0 0 1 1 - Don’t Use 0 1 1 0 - Set 1 0 0 1 - Reset 1 1 Last Q Last Qn - Hold

  7. Latches • SR Latch w/ Enable- we then can add an enable line using NAND gates- remember the Truth Table for a NAND gateAB F 00 1 - a 0 on any input forces a 1 on the output 01 1 - when C=0, the two EN NAND Gate outputs are 1, which forces “Last Q/Qn” 10 1 - when C=1, S & R are passed through INVERTED 11 0

  8. Latches • SR Latch w/ Enable- the truth table then becomesC S R Q Qn . 1 0 0 Last Q Last Qn - Hold 1 0 1 0 1 - Reset 1 1 0 1 0 - Set 1 1 1 1 1 - Don’t Use 0 x x Last Q Last Qn - Hold

  9. Latches • D Latch- a modification to the SR Latch where R = S’ creates a D-latch- when C=1, Q <= D- when C=0, Q <= Last ValueC D Q Qn . 1 0 0 1 - track 1 1 1 0 - track 0 x Last Q Last Qn - Hold

  10. Latches • VHDL of a D Latch architecture Dlatch_arch of Dlatch is begin LATCH : process (D,C,Q) begin if (C=‘1’) then Q<=D; Qn<=not D; else Q<=Q; Qn<=Qn; end if; end process; end architecture;

  11. Flip Flops • D-Flip-Flops- we can combine D-latches to get an edge triggered storage device (or flop) - the first D-latch is called the “Master”, the second D-latch the “Slave”MasterSlave CLK=0, Q<=D “Open” CLK=0, Q<=Q “Close” CLK=1, Q<=Q “Closed” CLK=1, Q<=D “Open” - on a rising edge of clock, D is “latched” and held on Q until the next rising edge

  12. Flip Flops • VHDL of a D-Flip-Flop architecture DFF_arch of DFF is begin FLOP : process (CLK) begin if (CLK’event and CLK=1) then -- recognized by all synthesizers as DFF Q<=D; Qn<=not D; else Q<=Q; Qn<=Qn; end if; end process; end architecture;

More Related