1 / 1

UL Vibration Testing Apparatus P13471 Walter Bergstrom, Sean Coots, Spencer Crandell, Mark Ellison

UL Vibration Testing Apparatus P13471 Walter Bergstrom, Sean Coots, Spencer Crandell, Mark Ellison Faculty Advisor: Dr. Benjamin Varela. Background Information To pass safety requirements for certification the luminaires must meet a series of Underwriters Laboratories Inc. Standards

hall-reynolds
Télécharger la présentation

UL Vibration Testing Apparatus P13471 Walter Bergstrom, Sean Coots, Spencer Crandell, Mark Ellison

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UL Vibration Testing Apparatus P13471 Walter Bergstrom, Sean Coots, Spencer Crandell, Mark Ellison Faculty Advisor: Dr. Benjamin Varela • Background Information • To pass safety requirements for certification the luminaires must meet a series of Underwriters Laboratories Inc. Standards • A Vibration Test Stand is currently being used by Eaton Corporation to test pendant mount luminaires according to section 33 of the UL844 Standard. • The Current Vibration Test Stand is outdated, has multiple design flaws, and design documentation and drawings are non-existent • Cooper Crouse-Hinds would like a new modernized Vibration Test Stand to be developed that addresses some of the design flaws of the current system while maintaining UL844 Test Standards • Design Specifications • New design must have a total displacement of 1/32” and provide oscillations at 2000 cycles per minute • New design envelope should be equal to or smaller than current design • New design should allow for adjustment of stroke • Must be able to support multiple luminaires with multiple pipe sizes • Design Process • Identify faults with current system • Brainstorm multiple designs with multiple solutions to current faults • Weigh pros and cons of each design to eliminate weakest designs and select final design path • Review design for potential failure areas • Areas of potential failure were analyzed using ANSYS • Final Design • Crankshaft design for rotary to linear motion • Custom steel crankshaft connecting eccentric pin to linear slider • Two piece friction locking mechanism for stroke adjustment • Two locking T-blocks • Hand sliding for coarse adjustment • Set screw for fine adjustment • Linear slider mechanism to ensure linear motion • Contains crankshaft and eccentric pin for safety • Polycarbonate hatches allow for maintenance • Pillow block linear bearings Conclusions • The apparatus must meet the proposed deflection requirements of 1/32” • The apparatus will be tested for force required to bend the NTP pipe that will support the luminaire • Forces from inertia will not be tested since this portion of the design does not include a motor • Full testing will occur after Imagine RIT • Acknowledgements • Dr. Stephen Boedo • Dr. Mike Parthum • Ed Leubner • Joe Manahan • Eaton Corporation • Dave Hathaway • Rob Kraynik • Jan Maneti

More Related