1 / 7

Group Process Report

Group Process Report. Group 6: Fayekah Assanah Seth Kendler Laura Pirro Yashvardhan Shrivastav. Team Progress. Choose design to modify from 4 types of phone types Chose Bell’s MagnetoPhone to modify Brainstormed various design improvements Construction of prototype

hamlet
Télécharger la présentation

Group Process Report

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Group Process Report Group 6: Fayekah Assanah Seth Kendler Laura Pirro Yashvardhan Shrivastav

  2. Team Progress • Choose design to modify from 4 types of phone types • Chose Bell’s MagnetoPhone to modify • Brainstormed various design improvements • Construction of prototype • Testing and development of prototype • Writing the patent and making CAD drawings • Bringing everything together for final presentation

  3. Group Work Division • Construction and testing of design – Fayekah • Writing patent – Seth • CAD drawings – Laura • Making presentations - Yash

  4. Choosing Design • Group discussion on 4 phone types • Chose Bell’s Magnetophone design • Reasons for choosing magnetophone: • Easiest to work with • Could be easily improved upon • Transceiver was more straightforward than the receiver

  5. Brainstorming • Weakness of Bell’s Prototype: • Signal strength very low • Not portable • Proposed Improvements: • Pass current through coil • Improved suspension system for the magnet • Include soft-iron core • Introduce a step up transformer into the design

  6. Construction of Prototype • Decide and buy various material used in the prototype • Build the base and outer shell • Build inner components of prototype

  7. Testing & Development • On testing the prototype we discovered that our signal strength did not match our expectations • Hence we made certain changes to our design: • Modifying the coil to be multilayered • Use of an op-amp circuit to improve signal strength

More Related