1 / 23

－ P&ID － Piping & Instrument Diagram

－ P&ID － Piping & Instrument Diagram. What is P&ID. Basic Engineering document Indicating -Process Requirement -Equipment in the Plant -Piping and Piping Component -Instrument and Logic Relations. What should be indicated on P&ID?. Process requirement.

iago
Télécharger la présentation

－ P&ID － Piping & Instrument Diagram

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. －P&ID－Piping & Instrument Diagram

  2. What is P&ID • Basic Engineering document • Indicating -Process Requirement -Equipment in the Plant -Piping and Piping Component -Instrument and LogicRelations

  3. What should be indicated on P&ID? Process requirement - PFD : all line and flow, every item - not on PFD : relieving system, pump minimum flow, compressor anti surge flow, isolation system - item for maintenance, operation, pre-commissioning, commissioning, start-up

  4. What should be indicated on P&ID? Equipment - all equipment with exact number and components : all nozzles, manholes, internals - type of connection to piping - equipment item number, service name, major specification

  5. What should be indicated on P&ID? Piping - all lines for normal operation, startup, shutdown, emergency, special operation, and maintenance - all piping components (valves etc.) and notes on them (CSO, CSC, TSO) - line information : line no., size, fluid symbol, piping service class, insulation - configuration requirement : No Pockets, Free Draining

  6. What should be indicated on P&ID? Instrumentation - instrumentation for controlling, monitoring, emergency shutdown, sequence control, interlock, automatic start/stop - field instrument - control and shutdown valves with their type, size, failure status - pressure relief valves with their set pressure and size - kind of signal : pneumatic, electric, hydraulic, capillary tubing, softlink

  7. What should be indicated on P&ID? Other - battery limit between client and contractor - area battery limit - change of responsibility between Piping and Instrument, Contractor and Vendor - extent of packaged equipment supply - breaks of line information : line number, piping service class, insulation

  8. What information can you get? • For Equipment Outline/Internals • For Piping Line No./Size/Material/Insulation/Line Configuration/Piping Component Type • For Instrument Tag No./Function/Control Method

  9. P&ID is used for • Detail Engineering of each disciplines Piping layout/Material Purchase Instrument Logic/DCS Plan, etc • Planning of Construction/Commissioning/Plant Operation/Maintenance

  10. Process Verification Proj.Spec Discipline Comments P&ID IFA P&ID IFC Company Comments HAZOP SIL Study, etc. Field Change Feedback Detail Design Feedback Vendor Data Input P&IDAs Built How to Develop/Finalize P&ID IFH

  11. P&ID Symbols

  12. P&ID Symbols

  13. P&ID Symbols

  14. P&ID Symbols

  15. P&ID Practices

  16. Control valve loop

  17. LT/FT Cascade Control

  18. Split range control(1)

  19. Split range control(2)

  20. Place equipment and its components • Connect main piping • Complete control valve loop • Place other instrument and connect signals • Indicate safety devices incl. alarm • Place piping components (Valve/Fitting) as required • Check detail and add items required incl. vent/drain connection

More Related