1 / 14

Lecture 14

Lecture 14. ANNOUNCEMENTS Midterm #1 results (undergrad. scores only): N=74; mean=62.8 ; median=63 ; std.dev.=8.42 You may pick up your exam during any TA office hour. Regrade requests must be made before you leave with your exam.

isleen
Télécharger la présentation

Lecture 14

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 14 ANNOUNCEMENTS • Midterm #1 results (undergrad. scores only): • N=74; mean=62.8; median=63; std.dev.=8.42 • You may pick up your exam during any TA office hour. • Regrade requests must be made before you leave with your exam. • The list of misunderstood/forgotten points has been updated. OUTLINE • Frequency Response (cont’d) • CE stage (final comments) • CB stage • Emitter follower • Cascode stage Reading: Chapter 11.4-11.6 10 38 25

  2. CE Stage Pole Frequencies, for VA<∞ Note that wp,out > wp,in

  3. I/O Impedances of CE Stage

  4. CB Stage: Pole Frequencies • Note that there is no capacitance between input & output nodes  No Miller multiplication effect! CB stage with BJT capacitances shown

  5. Emitter Follower • Recall that the emitter follower provides high input impedance and low output impedance, and is used as a voltage buffer. • Follower stage with BJT capacitances shown • CL is the load capacitance Circuit for small-signal analysis (Av)

  6. AC Analysis of Emitter Follower • KCL at node X: • KCL at output node:

  7. Follower: Zero and Pole Frequencies • The follower has one zero: • The follower has two poles at lower frequencies:

  8. Emitter Follower: Input Capacitance • Recall that the voltage gain of an emitter follower is Follower stage with BJT capacitances shown • CXY can be decomposed into CX and CY at the input and output nodes, respectively:

  9. Emitter Follower: Output Impedance Circuit for small-signal analysis (Rout)

  10. Emitter Follower as Active Inductor • A follower is typically used to lower the driving impedance  RS > 1/gm so that the “active inductor” characteristic on the right is usually observed. CASE 1: RS < 1/gm CASE 2: RS > 1/gm capacitive behavior inductive behavior

  11. Cascode Stage • Review: • A CE stage has large Rin but suffers from the Miller effect. • A CB stage is free from the Miller effect, but has small Rin. • A cascode stage provides high Rin with minimal Miller effect.

  12. Cascode Stage: Pole Frequencies Cascode stage with BJT capacitances shown (Miller approximation applied) Note that

  13. Cascode Stage: I/O Impedances

  14. Summary of Cascode Stage Benefits • A cascode stage has high output impedance, which is advantageous for • achieving high voltage gain • use as a current source • In a cascode stage, the Miller effect is reduced, for improved performance at high frequencies.

More Related