1 / 19

Charging System Fundamentals

Charging System Fundamentals. Chapter 34 Page 449. The Alternator. System Diagram. Battery. Alternator. The Alternator. Locations Can Vary. V- Belt Pulley. Serpentine Belt Pulley. Parts Breakdown. Alternating Current (AC).

jaden
Télécharger la présentation

Charging System Fundamentals

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Charging System Fundamentals Chapter 34 Page 449

  2. The Alternator

  3. System Diagram Battery Alternator

  4. The Alternator

  5. Locations Can Vary V- Belt Pulley Serpentine Belt Pulley

  6. Parts Breakdown

  7. Alternating Current (AC) • The rotor is a shaft wrapped the wire, when a voltage is introduced– it produces an electromagnet • The stator is a series of three wire wrappings that are stationary • As the rotor turns in side the stator ring– current is induced (produced) making current flow

  8. Magnetic Field

  9. Rotor

  10. Alternator Rotor and Magnetic Poles

  11. Stator

  12. Voltage Output Patterns Positive Negative All three windings One stator winding 13 -14 volts Converted to positive only!

  13. Diodes • One way check valve- allows current to flow in one direction but not in reverse • This is how the negative voltage that is produced in the alternator is not allows to the battery. • Sets are usually placed in a heat sink- they get extremely hot– the sink can dissipate this heat

  14. Electrical Connection • Brushes allow for contact with rotor • Power is controlled from the ignition switch

  15. Slip Rings and Brushes

  16. The Fan Draws Air From the Rear Through to the Front Cooling Internal Components

  17. Cooling Fan

  18. Voltage Regulator • Maintain voltage between 13 and 15.5 volts • Under 13 would not charge battery • Over will overload the electrical circuits, especially computer controlled components. External voltage regulators were used until the 1980’s Internal regulators are used in many alternators On board computers have eliminated the need for regulators in today’s vehicles

  19. Your Job. • Complete chapter Questions 1-10 (review) and 1-5 (ASE-style). Page 457-458 • Write on a separate paper and write out the complete question and your answer. ( do not write the other answer options). • Complete the chapter worksheet (I will give it out). You may write on it. • File all items in your note book. • Notebooks will be graded in the future.

More Related