1 / 11

Interference of Light

Interference of Light. Light is an electromagnetic (EM) wave . Wave properties: Diffraction – bends around corners, spreads out from narrow slits Interference – waves from two or more coherent sources interfere. Double Slit. m=2 m=1 m=0 (center)

jesuss
Télécharger la présentation

Interference of Light

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Interference of Light Light is an electromagnetic (EM) wave. Wave properties: Diffraction – bends around corners, spreads out from narrow slits Interference – waves from two or more coherent sources interfere Physics 1B03summer-Lecture 11

  2. Double Slit m=2 m=1 m=0 (center) m=-1 m=-2 θ incident light double slit separation d screen Result: Many bright “fringes” on screen, with dark lines in between. Physics 1B03summer-Lecture 11

  3. Concept Quiz A very thin transparent sheet placed over BOTH slits delays the waves passing through both slits by one-quarter cycle. What happens? • The interference fringes disappear • The fringes all shift upwards • The fringes all shift downwards • There is no change to the pattern. Physics 1B03summer-Lecture 11

  4. Example A double slit interference patter is observed on a screen 1.0m behind two slits spaced 0.3mm apart. Ten bright fringes span a distance of 1.65 cm. What is the wavelength of light used ? Physics 1B03summer-Lecture 11

  5. Intensity: Individual waves (one slit open at a time), I1 = I2 = Io where Io= (constant) x Eo2 Both slits open: Physics 1B03summer-Lecture 11

  6. Notes: • Maximum IR is 4 x IO. This is twice as large as the intensity “should” be (in the absence of interference). • At the minima, adding the second wave reduces the resultant intensity to zero, instead of doubling it. Averaged over the entire pattern, the total energy does add up to the sum of the energies in the individual beams. Physics 1B03summer-Lecture 11

  7. Refractive Index The speed of light depends on the material. We define the refractive index “n” as n = (speed of light in vacuum)/(speed of light in a material) material refractive index speed of light vacuum 1 c  300,000 km/s air 1.0003 glass about 1.5 200,000 km/s water 1.333 225,000 km/s diamond 2.4 125,000 km/s Physics 1B03summer-Lecture 11

  8. A beam of yellow light (wavelength 600 nm), travelling in air, passes into a pool of water. By what factor do the following quantities change as the beam goes from air into water? • speed • frequency • wavelength Physics 1B03summer-Lecture 11

  9. Reflection and Phase Change Light waves may have a 180° phase change when they reflect from a boundary: “optically dense” medium (larger refractive index) no phase change at this reflection 180° phase change when reflecting from a denser medium Just remember this : low to high, phase shift of pi ! Physics 1B03summer-Lecture 11

  10. Example: Thin film What is the minimum thickness of a soap film (n  1.33) needed to produce constructive interference for light with a 500nm wavelength ? (air : n  1.00). What about destructive interference ? Physics 1B03summer-Lecture 11

  11. Example: Antireflection coatings To reduce reflections from glass lenses (n  1.5), the glass surfaces are coated with a thin layer of magnesium fluoride (n  1.38). What is the correct thickness of the coating for green light (550 nm vacuum wavelength)? MgF2 glass air Physics 1B03summer-Lecture 11

More Related