Installation Notes MC-CAT Version 6.0

Installation Notes MC-CAT Version 6.0

Installation Notes MC-Cat Version 6.0 Contents 1 Installation MC-Cat Version 6.0 2 Installation CAD Software Update of MC-Cat Version 6.0 3 Update of CAD Software 4 Download MC-Cat Version 6.0 in Internet 5

Installation Notes MC-Cat Version 6.0 MC-CAT • Wenn the CD is put in the drive and AUTOPLAY is activated, the above screen appears. • If not, then please start SETUP.EXE on the CD-ROM. • Select the language for the installation and press OK. zurück

Installation Notes MC-Cat Version 6.0 MC-CAT • The CD-ROM can be started here „Start from CD…“, • (without installation) • the CAD Software installed „Install CAD Software“ • or the CD Software installed with „WEITER >“ zurück

Installation Notes MC-Cat Version 6.0 MC-CAT • The target directory can be selected here, the installation goes further with WEITER >. zurück

Installation Notes MC-Cat Version 6.0 MC-CAT • The name for the Start Menu can be given here, then further with WEITER >. zurück

Installation Notes MC-Cat Version 6.0 MC-CAT • Is a start symbol required for the desktop? • Then click here and then WEITER > zurück

Installation Notes MC-Cat Version 6.0 MC-CAT • Click INSTALLIEREN to complete the installation. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Click on „Install CAD-Software…“. • CAUTION! • Installations- or Administrator Rights are needed. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Do you want to install? • Click on OK . • A click on Abbrechen will terminate the installation. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Information over the further installation… • No input is necessary. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Please read the notes carefully and then click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Select here the components to install. Danfoss and WorldCAT-CIF must be installed. The other componets are tools to measure the geometries generated in case no CAD system is available. Then click WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • The installation of the single components now begins. Please read the notes carefully. Click WEITER> to carry on with the installation. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Select here the 2D CAD system to which the WORLDCAT-CIF will connect to on the same computer. If no system is available leave all selections open. The click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • The installation of WORLDCAT-CIF now takes place. • Click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Select here the 3D CAD system to which the WORLDCAT-CIF will connect to on the same computer. If no system is available leave all selections open. The click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • The installation of WORLDCAT-CIF 3D now takes place. • Click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Click on Fertigstellen> to complete the installation of the WorldCAT-CIF. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Now all CAD Information will be installed. • Click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • The Installation is now ready. • Continue by clicking on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • All components are now installed. • Click on WEITER> to complete the installation. zurück

Installation Notes MC-Cat Version 6.0 CAD Software • Please read the notes carefully and finally click on OK to re-start the computer. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Click on the Symbol to reach the update page. Should one of the lines be RED , the MC-Cat update button will be active. Click here to start the UPDATES … zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Max. 3 updates will be started. Should only 1 be started, then the file must be downloaded, MC-Cat closed down, the update started and MC-Cat started again. Then further downloads can be started. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Select the installation language and click OK. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Read carefully and click WEITER>. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • The EXACT directory of the MC-Cat should be shown here. Please check carefully. Further with click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Click Ja. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Which Start Menu name should be used?? • Then click WEITER>. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • Should another desktop symbol be created? (Not necessary) • The click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • The selection can be seen here. Should the details be incorrect then click on <ZURÜCK otherwise Installieren. zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • The installation progress is shown…… zurück

Installation Notes MC-Cat Version 6.0 Update MC-Cat Version 6.0 in Internet • The installation is now finished. Click on Fertigstellen to complete the installation. MC-Cat is then re-started. If necessary, further updates can now ne started. zurück

Installation Notes MC-Cat Version 6.0 CAD Software UPDATE • After downloading the UPDATE, and click on the EXE file, the given message appears. • Click OK to continue. zurück

Installation Notes MC-Cat Version 6.0 CAD Software UPDATE • Should no user inouts be required, the given screen appears after a short time. Click on OK. zurück

Installation Notes MC-Cat Version 6.0 CAD Software UPDATE • Should user input be required, the following screen appears after clicking OK on the previous screen. • Read carefully and click WEITER> . zurück

Installation Notes MC-Cat Version 6.0 CAD Software UPDATE • In this example the CAD system (if present) needs to be selected. Should no system be present, all points should be de-selected and then click on WEITER>. zurück

Installation Notes MC-Cat Version 6.0 CAD Software UPDATE • Click on Fertigstellen> to complete the installation. zurück

Installation Notes MC-Cat Version 6.0 Download MC-Cat Version 6.0 in Internet • www.bauergear.info Click hier to reach the downloads. zurück

Installation Notes MC-Cat Version 6.0 Download MC-Cat Version 6.0 in Internet • Firstly 1) MC-Cat and then 2) CAD Files should be downloaded. The CAD Files can be downloaded as 1 file or smaller 10MB files…. Click here for MC-Cat…. Click here for CAD Files(1 File)…. Click here for CAD Files(7 Files)…. zurück

Installation Notes MC-Cat Version 6.0 Download MC-Cat Version 6.0 in Internet • The download will be started. The ZIP archive should be saved and extracted in a temporary directory and the file SETUP.EXE started. zurück

Installation Notes MC-CAT Version 6.0