1 / 32

ES 100 Micro Air Vehicle Project

ES 100 Micro Air Vehicle Project. Montgomery College Professor: Dr. Charles Kung Summer I 2012. Team Members: Andrew Joe Laura Mohammed Nathelie Noella Stephanie Thomas. Introduction. Our goal is to design a Unmanned Aerial Vehicle (UAV) with a surveillance mechanism.

kennan-faulkner
Télécharger la présentation

ES 100 Micro Air Vehicle Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ES 100 Micro Air Vehicle Project Montgomery College Professor: Dr. Charles Kung Summer I 2012 Team Members: Andrew Joe Laura Mohammed Nathelie Noella Stephanie Thomas

  2. Introduction Our goal is to design a Unmanned Aerial Vehicle (UAV) with a surveillance mechanism

  3. Objectives The UAV must pass a field test and the requirements include: • UAV must be able to take off and land from tennis court • Flight test should be at least 2 minutes long • UAV must capture video footage from flight to landing

  4. Constraints The UAV must: • Weigh a maximum of 450 grams • Have a safe design and careful piloting • Operate by battery power (standard 7.2V, 400mAh) • Use a suitable RC frequency (2.4 Ghz)

  5. Plan of Action Steps to completing the project: • Elect a group leader and assign roles • Brainstorm designs that meet with the objectives and constraints • Cost comparison and analysis • Trainer flying practice • Preliminary design process • Design comparison and analysis • Assembly of aircraft • Practice flying the aircraft • Final flight test and evaluation

  6. Plan of Action Diagram

  7. Gantt Chart

  8. Description Things we want to accomplish: • Build a UAV with a camera mount attachment • Minimize cost expenses • Maintain performance and reliability • Maximize and determine the most suitable components

  9. Type of UAV Design Fixed Wing Design

  10. Navigational System Remote Control

  11. Propulsion System Propeller Propulsion

  12. Take-off Mechanism Accelerated Take-off on the surface of Tennis Court

  13. Tail Design Simple Tail Design with a Rudder, Elevator, and Horizontal/Vertical Stabilizer

  14. Camera Mount Design Our Designed Camera Mount

  15. Mechanisms for Securing Components Screws/Bolts and Double Sided Tape

  16. Flight Trainer Chosen The Night Vapor RTF

  17. Basic Platform Chosen The GWS Slowstick Airplane ARF

  18. Motor, Servos, and Power System Chosen Dynamic Power System Kit

  19. Battery and Charger Chosen Sky Lipo Battery and Charger Kit (1000 mAh, 11.1 V, 20 C)

  20. Design Sketches

  21. Design Details Battery Mount Camera Mount

  22. Vertical Stabilizer Horizontal Stabilizer

  23. Fuselage Elevator

  24. Leading Edge Wing Support Trailing Edge Wing Support

  25. Motor Motor Mount

  26. Rudder Propella

  27. Servo Tray Tail Gear Support

  28. Wing

  29. Pro-Engineering Assembly

  30. List of Materials • 1 Slow Stick Airplane ARF: No Power Supply • 1 3 pc Dynamics Brushless Motor +18A with 9g Servos • 1 Sky Lipo 1000 mAh, 11.1V , 20C Battery

  31. Bill of Materials

  32. References • Aviation Knowledge - http://aviationknowledge.wikidot.com/aviation:parts-airplane • Google Images - http://www.google.com/images • Google maps - http://www.maps.google.com/ • Sample Project Report - http://www.montgomerycollege.edu/sample_mav_report.pdf • RCSgroups - http://www.rcgroups.com/forums/showthread.php?t=917604 • Frequency Picture - http://rrsg.ee.uct.ac.za/members/jwamicha/usrp2_fft-SignalGenerator-Off.png

More Related