1 / 25

Polycrystal homogenization accounting for channeling. Methodology and first results

Polycrystal homogenization accounting for channeling. Methodology and first results. Diogo GONCALVES , Maxime SAUZAY with the contribution of: Bertrand SICAUD and Jerôme HAZAN. 1 st Plenary meeting, 13-14 February, 2019. SUMMARY 1- Background/Objectives

layne
Télécharger la présentation

Polycrystal homogenization accounting for channeling. Methodology and first results

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Polycrystal homogenization accounting for channeling.Methodology and first results Diogo GONCALVES , Maxime SAUZAY with the contribution of: Bertrand SICAUD and JerômeHAZAN 1st Plenary meeting, 13-14 February, 2019

  2. SUMMARY 1- Background/Objectives 2- New localization rule (three scales) 3- First results 4- Conclusions and interactions with other sub-tasks GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  3. Background • FCC metals/alloys and -Fe at room temperature • Plastic slip occurs in thin bands which usually cross all the single crystal or grain of size • The matrix between slip bands behaves almost elastically ; • Two main characteristic lengths: • - slip band thickness, (periodicity) • - slip band interspacing, d • Activation of low number of active slips systems even under strong plastic deformations • - Polycrystal of 316L SS traction, 𝐸 = 17 %, ~70% of the analyzed grains in single slip Surfaces micrographs: 10% deformed brass [2], 17% deformed 316L SS [1], 4.46% deformed copper [3] and 4.23% deformed 𝜶-Fe [3]. Tensile tests at room temperature [1]Hazan, 2019. PhD dissertation, UPMC. [2]Fourie and, Wilsdorf , 1959. ActaMetallurgica 7, 339–349 [3] Kahloun et al., 2016. International Journal of Plasticity 84, 277–298. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  4. Background • FCC metals/alloys and 𝜶-Fe at room temperature • Plastic slip occurs in thin bands which usually cross all the single crystal or grain of size • The matrix between slip bands behaves almost elastically ; • Two main characteristic lengths: • - slip band thickness, e (periodicity) • - slip band interspacing, d • Activation of low number of active slips systems even under strong plastic deformations • - Polycrystal of 316L SS traction, 𝐸 = 17 %, ~70% of the analyzed grains in single slip Similar behavior is observed in irradiatedmetals/alloys (BCC iron [1], F-M steels [2,3]) Channeling Deformation F82H, 15.2dpa at 236°C, 1305appm, tested at 250°C [2] [1] Eldrup et al., (2002) Journal of Nuclear Materials, 307-311, 912-917. [2] Wang et al., (2016). Journal of Nuclear Materials 468, 246–254. [3] Maloy et al., (2002). www.researchgate.net GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  5. Background The deformation of irradiated metallic polycrystals results in: • strong increase in the yield stress [1]  qualitatively predicted by combined MD – DD simulations [2,3]; • almost no strain-hardening in single and in polycrystals  qualitatively predicted by DD simulations (channelling)[1,2]; • Low number of active slips systems • Clear bands if neglecting coplanar slip • Irradiated stainless steels • 5 dpa and • Only one or two slip channel family is observed in each grain [4]. Effect of irradiation on the flow curve at T = 300 °C[1] [1] Chaouadi, R., 2008. Journal of NuclearMaterials 372, 379–390 [2] Li et al., 2011. Computational Materials Science 50, 2496–2501 [3] Arsenlis et al., 2012. ActaMaterialia 60, 3748–3757 [4] Jiao et al., 2018.. Journal of Nuclear Materials 501, 312–318. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  6. Background Irradiatedmetals/alloys • Ironpolycrystal [2] • 304L SS polycrystal [1] ~ perfect plasticity ~ perfect plasticity Tensile curves, Irradiated 304L SS (left) and Iron (right) [1] Hureet al., (2018). Contribution of Materials Investigations and Operating Experience to Light Water NPPs’ Safety, Performance and Reliability. [2] Eldrup et al., (2002).. Journal of Nuclear Materials 307–311, 912–917. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  7. Background “Standard” homogenization models • Polycrystalline homogenization • Mean field approaches (Eshelby’s solution) • Full field approaches (FE and FFT calculations) • Predictions of standard homogenization model  Intergranular hardening in the “ideal” elastic-plastic framework with is much to high in comparison to the experimental curves of irradated polycrytals Mean field approaches schematization Overall tensile responses of the different self-consistent approaches and the FE computations in the case quasi-ideal elastic-plasticity (no hardening and no strain rate effect) [1]. [1] Gonçalves et al, submitted, 2018. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  8. Background “Standard” homogenization models • Polycrystalline homogenization • Mean field approaches (Eshelby’s solution) • Full field approaches (FE and FFT calculations) • The number of slip systems activated by grain increases very quickly with the remote strain because of the local multiaxial stress tensor. • Predictions of standard homogenization model  More than three slip systems activated as [1]. Mean field approaches schematization Number of active slip systems by grain for two different self-consistent models. A slip system, i, is assumed to be active when . [1] Gonçalves et al, submitted, 2018. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  9. Background Why should we incorporate channels in the model ? • Plastic slip negligible between channels  lower internal stresses expected due the lower multiaxiality at the grain scale • Activation of a low number of channels (slip systems) • Low hardening behavior, characteristic of irradiated materials • A better agreement with experimental tensile curves and observations is expect Objectives • Propose and apply a dedicated mean-field homogenization model accounting for slip localization inside F-M blocks; • Comparing the results with experimental data  irradiated BCC metals/alloys (and some FCC ones, because the much more numerous data available) • Validating this modelling by comparing mean-field and full-field homogenization predictions GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  10. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip bad is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ) and a thickness, ,which can be measured experimentally; Elastic matrix Mean grain size, Channel thickness, Inter-channelspacing, Schematic view of a penny-shaped ellipsoid  Schematically view of plastic slip bands embedded in an elastic matrix. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  11. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip band is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ∅) and a thickness, 𝑒, which can be measured experimentally; • Solution of the Eshelby problem for one activated slip system which plane is parallel to the channel one: • Average channel (ch) stresses depending on the remote shear stress, , the elastic shear modulus, , the channel/ slip band plastic slip, • The ratio leading to muchlowerinternal stresses insidethe polycrystal and thenlowerstrainhardening. ) Shear stress computed accounting for the activated channel GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  12. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip band is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ∅) and a thickness, 𝑒, which can be measured experimentally; • Solution of the Eshelby problem for one activated slip system which plane is parallel to the channel one: • 2)  Each channel/slip band obeys plasticity laws based on the equations resulting from DDD - [Kubin et al., 2008] FCC crystals [1] 100 randomly oriented crystals 12 slip systems  {111}<110> Total dislocation density  2 families of mobile dislocation (edge and screw) and 1 family of edge-dipoles BCC crystals [2,3] 100 randomly oriented crystals corresponding to blocks 24 slip systems  2 families: {110}<111> and {112} <111> Total dislocation density  2 families of mobile dislocations: edge and screw dislocations Low-angle boundaries (LAB)*  24 families of symmetric tilt boundaries and 6 families of twist boundaries (neglected as a first approach because the misorientations are vey low) [1] Gonçalves et al, submitted, 2018 [2] Giroux et al., 2010. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 527, 3984–3993. [3] Giordana et al., 2012. Materials Science and Engineering: A 550, 103–111. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  13. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip band is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ∅) and a thickness, 𝑒, which can be measured experimentally; • Solution of the Eshelby problem for one activated slip system which plane is parallel to the channel one: • 2)  Each channel/slip band obeys plasticity laws based on the equations resulting from DDD - [Kubin et al., 2008] • 3) The channels/slip bands inside each grain are able to accommodate all of the plastic deformation of the grain • fraction of channels into the grain: • plastic strain tensor of channels: • plastic strain tensor of grains: [1] Ménard (2005). PhD Dissertation, Université Bordeaux I, Bordeaux. [2] Kahloun et al. (2016) International Journal of Plasticity 84, 277–298. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  14. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip band is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ∅) and a thickness, 𝑒, which can be measured experimentally; • Solution of the Eshelby problem for one activated slip system which plane is parallel to the channel one: • 2)  Each channel/slip band obeys plasticity laws based on the equations resulting from DDD - [Kubin et al., 2008] • 3) The channels inside each grain are able to accommodate all of the plastic deformation of the grain: • 4) The channels are considered as sufficiently long and close one from another (𝑑≪𝜙), resulting in a 'quasi-homogeneous' stresses state in each grain (validation by crystal FE computations under progress). Schematically view of stress state inside the crystal. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  15. Mean field homogenization accounting for channeling • Hypotheses: • 1)  Each channel/slip band is embedded in an elastic matrix • The channels/slip bands are characterized by a length (grain size, ∅) and a thickness, 𝑒, which can be measured experimentally; • Solution of the Eshelby problem for one activated slip system which plane is parallel to the channel one: • 2)  Each channel/slip band obeys plasticity laws based on the equations resulting from DDD - [Kubin et al., 2008] • 3) The channels inside each grain are able to accommodate all of the plastic deformation of the grain: • 4) The channels are considered as sufficiently long and close one from another (𝑑≪𝜙), resulting in a 'quasi-homogeneous' stresses state in each grain (validation by crystal FE computations under progress). • 5) In the case of uniform stresses on the channels/bands, the stress in the grain is then calculated by GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  16. Channel/slip bands parameters FCC metals/alloys BCC metals/alloys [1] Neuhauser et al. (1975).Acta Metallurgica 23, 441–453. [2] Ménard (2005). PhD Dissertation, Université Bordeaux I, Bordeaux. [3] Sicaud (2017), Private communication. [4] Kahloun et al. (2016) International Journal of Plasticity 84, 277–298. [5] Kramer et al. (2005) Acta Materialia 53, 4655–4664. [6] Byun, private communication [7] Sharp, J. (1967). Philosophical Magazine 16, 77-. [8] Yao et al. (2004). J. Nucl. Mater. 329, 1127–1132. [9] Hashimoto et al. (2006). Journal of NuclearMaterials, 351, 295–302. [10] Kahloun et al. (2016). International Journal of Plasticity 84, 277–298. [11] Wang et al. (2016). Materials Characterization 118, 225–234.

  17. Results FCC alloys (not irradiated) • Constant inter-band spacing, 𝑑 Tensile curves, 316L SS (left) and Cu30%Zn (right) • Low SFE polycrystals: • Low thickness, e, values similar to irradiated materials • intragranular hardening • dislocation density evolution laws • quasi-linearhardening Number of active slip systems per grain for different mean grain sizes for 316L SS. A slip system, , is assumed to be active when GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  18. Results Irradiatedmetals/alloys • Hypothese: • 1)  The number of channels increases with the plastic deformation [1] Implementation of a model considering a critical value of plastic strain, reached in the channels Experimental observations [1,2] Lower internal stresses [1] Hashimoto et al. (2006). Journal of Nuclear Materials, 351, 295–302. [2] Ménard(2005). PhD Dissertation, Université Bordeaux I, Bordeaux. [3] Kahloun et al. (2016) International Journal of Plasticity 84, 277–298. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  19. Irradiatedmetals/alloys • Hypotheses: • 1)  The number of channels in the crystal increases with plastic deformation [1,2] • When the active slip channel reaches a critical value of plastic strain, , a new channel appears in the crystal to accommodate the plastic strain • 2) The corresponding evolution of the inter-band • distance is expressed by: Better agreement with irradiated materials Tensile curves, EP. Model with increasing of the channels number inside the grains [1] Ménard (2005). PhD Dissertation, Université Bordeaux I, Bordeaux. [2] Kahloun et al. (2016) International Journal of Plasticity 84, 277–298. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  20. Conclusions|Perspectives • 1)  Implementation of a scale transition model based on channeling deformations, based on experimental observation • Simulation using experimental measurements carried out on different irradiated materials: • BCC-Iron, F-M steels(under progress) • Definition of inputs parameters according experimental observations (under discussion) • Channels thickness • PAG size, packet size, block size (F-M steels) • Initial critical stress, depending on the irradiation dose • 2)  Development of plastic crystalline laws for BCC crystals, based on DDD calculations • Take into account the effect of irradiation defects • 3) For future works: validation of this model in comparison to FE Computation curves (under progress by B. Sicaud) • Effect of lattice rotation due plastic deformation FE Computation mesh: squared grain, in a homogeneous matrix, containing a fixed number of slip bands (developped by B. Sicaud) GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  21. M4F project generalities • 1)  Task 5.1.1 – Mean-field homogenization accounting for channeling • D5.1 (CEA, TRC and METU) – Month 36  ~07/2020 • 2) Event and publications: • Conferences (Oral presentations) • Matériaux2018 (Strasbourg, France) – Diogo GONCALVES – “Homogénéisation du comportement polycristallin : Considérer la plasticité à l’échelle des grains ou des bandes de glissement ? "  • TMS 2019 (San Antonio, Texas, USA) – Bertrand SICAUD – "Accounting for slip band at the grain scale in polycrystalhomogenizationapplied to FCC metals and alloys" • IIB 2019 (Paris, France) – Diogo GONCALVES – "Polycrystalline homogenization accounting for grain size effects through slip bands” • 3) Future works will be discussed in a meeting this afternoon: MaximeSauzay (CEA), Diogo Gonçalves (CEA), Dome Tanguy (CNRS), Chen Jia-Chao (PSI) , Mercedez Hémandez-Mayoral (Ciemat) GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  22. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 755039 GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  23. Background “Standard” homogenization models • Polycrystalline homogenization • Mean field approaches (Eshelby’s solution) • Full field approaches (FE and FFT calculations) • The number of slip systems activated by grain increases very quickly with the remote strain because of the local multiaxial stress tensor. • These approaches ignore the intra-granular scale location, and therefore some of the influence of SFE. In many standard homogenization schemes, the grain size is accounted for in the mean-free path evaluation (Saada’s model). Standard polycrystal models are not able to reproduce the strong effect of SFE on the Hall-Petch coefficient [1]. Evolution of the Hall-Petch coefficient with stacking fault energy. Comparison of the results of the Kröner and Kröner-Secant mean-field models and experimental measurements [1]. [1] Gonçalves et al, submitted, 2018. GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  24. Results FCC metals/alloys Number of active slip systems per grain for different mean grain sizes for 316L SS. A slip system, , is assumed to be active when Number of active slip systems per grain for different FCC metals and alloys. A slip system, , is assumed to be active when GONCALVES / M4F 1st Plenary Meeting, 14th Feb 2019

  25. Prédictions Results FCC metals/alloys Evolution of the Hall-Petch coefficient () with the normalized stacking fault energy. Comparison of the results of the BG model with those of Kröner and Kröner-Secant mean-field models and experimental measurements [1]. [1] Gonçalves et al, submitted, 2018. MATÉRIAUX2018 | 19 nov 2018

More Related