1 / 16

EGR 334 Thermodynamics Chapter 3: Section 9-10

EGR 334 Thermodynamics Chapter 3: Section 9-10. Lecture 08: Specific Heat Capacity. Quiz Today?. Today’s main concepts:. Introduce Specific Heats, c v and c P . Understand when it is acceptable to apply specific heat. Calculate changes of energy using specific heats

leyna
Télécharger la présentation

EGR 334 Thermodynamics Chapter 3: Section 9-10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EGR 334 ThermodynamicsChapter 3: Section 9-10 Lecture 08: Specific Heat Capacity Quiz Today?

  2. Today’s main concepts: • Introduce Specific Heats, cv and cP. • Understand when it is acceptable to apply specific heat. • Calculate changes of energy using specific heats • For liquids and solids, the saturated properties values may be used to approximate properties values for supercooled property values, if the model can be treated as incompressible. • For incompressible liquids and solids, cv ≈ cp • the specific heat ratio is defined as k = cp/cv Reading Assignment: • Read Chap 3: Sections 11 Homework Assignment: From Chap 3: 49, 55,68, 78

  3. Think back to those simple, happy, carefree days of your youth, back when you were in Physics lab…. You performed experiments to try and figure out how the world around you worked. In one experiment you dropped hot aluminum pellets into a container of water and measured the change of temperature the water underwent. … it requires 1 calorie of heat to raise the temperature of 1 gram of water by 1 deg C. Using that information you found a property of aluminum called specific heat capacity.

  4. Sec 3.9 : Specific Heat and In Thermodynamics, two common forms of specific heat capacity are used. Constant Volume process Constant Pressure process -- Used to calculate changes of energy between states -- Defined for pure, simple compressible substances -- May be used only under certain “special conditions” -- Usually applied to “ideal gas” model When it can be applied: (if cv and cp are often treated as constants) and

  5. Sec 3.9 : Specific Heat isobars T2 the internal energy change or enthalpy change when heat is added at constant pressure or constant volume. T Specific Heats At constant volume T1 v This is an exact differential where At constant volume, dV=0; thus, Finally:

  6. Sec 3.9 : Specific Heat isobars At Constant Pressure T2 T This is an exact differential T1 v where At constant pressure, dP=0; thus, Finally,

  7. Sec 3.9 : Specific Heat Specific Heat Ratio: • For air (at 68oF (20oC) and 14.7 psia (1 atm)):

  8. Fig. 3.9 Shows that cv and cp for water/steam vary with temperature and pressure. Fig03_09

  9. In practice, specific heats will be used as constants which are looked up on tables based on standard values of temperature and pressure. Fig03_09 Example of Table: Gases - Specific Heats and Individual Gas Constants

  10. Evaluating Properties of Liquids and Solids: While Appendix A does have a table for super-cooled water, for many other liquids, a super-cooled table is not available. What to do? For liquids and solids, it is acceptable practice to approximate and if a super cooled table is not available.

  11. Sec 3.10.1 : Approximations for Liquids using Saturated Data For a liquid, there is little change in v, u, h, s at different pressure and fixed T. Therefore, Evaluate liquids at the saturated state Since these properties are essentially only a function of T and not P, we call them Incompressible.

  12. Example: What is the enthalpy for Refrigerant 22 at T = 10 deg F. and p = 40 psi. (Refer to Table A-7E) o T=10 deg C * Temperature pressure p = 40 psi * spec. vol. • at T=10 deg….hf=13.33 Btu/lbm spec. vol.

  13. Sec 3.10.2 : Incompressible Substance Model Incompressible Substance: Includes any substance whose properties do not change with pressure. For liquids and solids: Thus But, So now what? Take partial with respect to T Thus,

  14. Sec 3.10.2 : Incompressible Substance Model Use the heat capacity to calculate the change in internal energy. If c = constant then that means, is small and can usually be dropped Therefore,

  15. Table of specific heat for incompressible materials. See the course website for the complete tables of specific heats for both compressible and incompressible materials.

  16. End of Slides for Lecture 08

More Related