1 / 4

Comprehensive Guide to VERSA PCR Liquid Handling Workstation Settings

This guide provides detailed instructions on configuring the temperature settings of the reagent/cooler block on the VERSA PCR Liquid Handling Workstation. Users can monitor temperatures ranging from 0 to 70 degrees Celsius in 25-degree increments, ensuring accuracy for experimental procedures. The guide also covers the setup of COM ports for seamless communication between instruments and software, plate mover settings, shaker parameters, and source temperature settings for various adapters. This essential resource aids in optimizing the workstation's functionality and performance.

lilah
Télécharger la présentation

Comprehensive Guide to VERSA PCR Liquid Handling Workstation Settings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Operation: List of Procedures Cooler Block Settings 1. This tab sets and monitors the temp. of the reagent/cooler block in the range of 0-70 degress C with .25 degrees C increments 2. This window allows for the setting of the COM ports. Ensure that COM ports are correctly selected for proper communication between instrument and the software 3. Simply input the desired temperature on the temperature field. Note that the temperature takes at least 30 minutes to initialize VERSA PCR Liquid Handling WorkstationUser’s Guide

  2. VERSA PCR Liquid Handling WorkstationUser’s Guide • Plate Mover Settings • 1. This tab allows for the parameters to be set with the plate mover option of the versa system • 2. In the “position association” section, the deck position is the position of the plate mover as found on the actual machine. The plate mover position columns is the position assignment as found in the “robotic arm” tab during the teach-position stage.

  3. VERSA PCR Liquid Handling WorkstationUser’s Guide • Shaker • 1. Use this tab when a shaker adaptor is pre-fitted onto the deck • 2. This tab allows for the setting of the shaker. Input the parameters and click apply to accept the settings

  4. VERSA PCR Liquid Handling WorkstationUser’s Guide • Source Temperature Settings • 1. This tab allows the user to set COM ports and temperatures for other cooling/heating adaptors that have been fitted onto the deck • 2. Temperature parameters can be set here for up to two different temperature adaptors

More Related