point datum point tool n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Point (Datum Point Tool) PowerPoint Presentation
Download Presentation
Point (Datum Point Tool)

Loading in 2 Seconds...

play fullscreen
1 / 7

Point (Datum Point Tool)

1 Vues Download Presentation
Télécharger la présentation

Point (Datum Point Tool)

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Point (Datum Point Tool) Create a point on a corner. Create a point on an edge/line. Create a point by using sketch Create a point by using offset coordinate system

  2. Create a point on a corner To create a point: Click Point -> Select a reference corner by click on it ->OK Note: Turn on/off the switch to show the point

  3. Create a point on an edge/line To create a point: Click Point -> Select a reference edge/line by click on it -> change Offset ->OK Note: Select Ratio & Real to see the difference, also check the Next End option

  4. Create a point by using sketch To create a point: Click SketchPoint -> Select a reference plane to sketch -> draw a point -> give the exact position to the point ->OK

  5. Using Offset Coordinate System To create a point: Click on Offset Coordinate System -> Select a reference Cartesian Coordinate System by click on it -> enter x, y, z values for the point you want to add into the pop out table ->OK

  6. Exercise #1: Points, Curve & Sweep

  7. Exercise #2: Point & Reference Pattern