SlideServe
Menu
Préférences
© SlideServe · v2026

Applications of MOS Transistors in Digital Integrated Circuits (1)

meredith-walters avatar
19 diapositives · 389 Views · Nov 20, 2014

Applications of MOS Transistors in Digital Integrated Circuits (1). Section 15.1. ADD an Instance of NMOS. NMOS transistor. A Simple Switching Circuit. variable DC voltage. Threhold Voltage. Threshold voltage of T0. Design variable. Library Setup. A Primitive Inverter Circuit. Large VDS

Applications of MOS Transistors in Digital Integrated Circuits (1) - slide 1
01 / 19Applications of MOS Transistors in Digital Integrated Circuits (1)
1 / 17

Télécharger la présentation

Applications of MOS Transistors in Digital Integrated Circuits (1)
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Applications of MOS Transistors in Digital Integrated Circuits (1) Section 15.1

  2. ADD an Instance of NMOS NMOS transistor

  3. A Simple Switching Circuit variable DC voltage

  4. Threhold Voltage Threshold voltage of T0

  5. Design variable Library Setup

  6. A Primitive Inverter Circuit Large VDS SATURATION Small VDS :Triode

  7. Determine Region of Operation OFF SATURATION TRIODE

  8. Determine Kn and Vth Need to select drain terminal in order to get current

  9. Derivation • ID=0.5 unCox(W/L)(VGS-VTH)2 • Find VTH • SQRT(2ID/(unCoxW/L))=VGS-VTH • The VGS that yields 0 LHS is the threshold voltage • SQRT(ID)=SLOPE(VGS-VTH) • SLOPE=SQRT(0.5 unCox(W/L)) • This example: W/L=2um/1um=2 • SLOPE=SQRT(unCox)

  10. To Calculate Kn,find SQRT(ID) The x interscept gives Vth Vth (this method)=150 mV Vth(Cadence)=164 mV

  11. Find Kn=W/LunCox SQRT(ID) dSQRT(ID)/dVGS This curve implies that unCox depends on VGS!

  12. Noise Margin Noise Margin: the maximum amount of noise at the input that can be tolerated before the output is affected significantly. attenuating attenuating amplifying dVout/dVGS NML NMH dVout/dVGS=small signal gain

  13. Generate Random Noise in Matlab

  14. Inverter In the Presence of Noise Relatively clean output 400 mV peak to peak noise Time Scaling Factor

  15. Inverter In the Presence of More Noise 1 V peak to peak of noise

  16. Noisy Input Relatively Clean Output

  17. Adding a Capacitor to the Output RC time constant

  18. Ring Oscillator 1nF oscillation

  19. Ring Oscillator with Output Capacitor Load of 10 nF