1 / 6

BDS Front-End FFB System

BDS Front-End FFB System. Glen White. FB-2. FB-1. BDS FFB Location. 2 Kicker / BPM pairs to straighten train and remove jitter at entrance to BDS. FB-1: Kicker: upstream QMBSY2 BPM: upstream QD90C FB-2: Kicker: upstream QD90C BPM: upstream QD90. Incoming Jitter from LINAC.

nishi
Télécharger la présentation

BDS Front-End FFB System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BDS Front-End FFB System Glen White

  2. FB-2 FB-1 BDS FFB Location • 2 Kicker / BPM pairs to straighten train and remove jitter at entrance to BDS. • FB-1: • Kicker: upstream QMBSY2 • BPM: upstream QD90C • FB-2: • Kicker: upstream QD90C • BPM: upstream QD90

  3. Incoming Jitter from LINAC • Vertical positions/angles of bunch train exiting LINAC (subtract mean values to get real offsets- 2 bits of beamline modeled separately in simulation). • 200 Seeds of 0.2s model ‘K’ GM + 100nm Quad jitter. • (1 sigma y = 2.6 um at BDS entrance) +/- 4.0 um +/- 0.07 urad +/- 0.7 um +/- 0.02 urad

  4. Kicker Requirements • Need to zero BPM readings to remove train shape and train-train jitter ~(3.6 um BPM1; 8.3 um BPM2). • Assume 1m length TESLA FFB stripline kicker design (max 0.15urad kick @ 250 GeV). • With calculated R34’s between BDS entrance and BPMs and between kickers and BPMs: • Can correct up to 9.9um (BPM1) and 7.5um (BPM2) per meter of kicker. • Need 0.36m of kicker for FB-1, 1.1m of kicker for FB-2. • Would need more kick in reality to take care of additional errors that build up over longer-timescales due to GM etc. • Specs to come from LINAC 5-Hz feedback studies. • From calculated R34’s between Kickers and IP: • 0.1 sigma y* equates to ~ 3nrad kick (Kicker 1); 116nrad kick (Kicker 2) • 0.1 sigma y’* equates to ~ 14nrad kick (Kicker 1); 5nrad kick (Kicker 2) • Max required resolution: <2%

  5. BPM Requirements • To keep jitter introduced by kickers affecting vertical IP position and angle greater than the 0.1-sigma level, BPM’s require better than the following resolution: • BPM 1: 200 nm • BPM 2: 265 nm

  6. FB Latency • Kicker-BPM distances: • FB-1: 41.4m • FB-2: 34.3m • ToF time + cable time (at 0.9c) + 100ns digital processing time gives latencies: • FB-1: 390ns • FB-2: 340ns • Feedback possible every-other bunch. • Interleaving with ANG+IP FFB systems minimizes jitter-growth impact.

More Related