1 / 1

Innovative Processable Thermoplastic Polyimides for Advanced Materials

IMITEC, Incorporated in Schenectady, NY, specializes in the production of melt and solution processable thermoplastic polyimides, aimed at advancing small business innovation and research. We have developed new procedures for preparing highly processable polyimides, eliminating the need for solvents and optimizing low-cost raw materials, specifically anhydrides. Our polyimides are available in various grades for diverse applications, including aircraft cable coatings, high-temperature adhesives, and composite matrix resins. Our innovations have gained interest from NASA for aerospace applications.

ori-dale
Télécharger la présentation

Innovative Processable Thermoplastic Polyimides for Advanced Materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INNOVATION Processable Thermoplastic Polyimides Small Business Innovation Research IMITEC, Incorporated Schenectady, NY The production of melt and solution processable for advanced materials and matrix resins • ACCOMPLISHMENTS • Developed new procedures to prepare highly processable polyimides • Polyimides can be supplies without solvent • Optimizedaration of key low cost raw materials - anhydrides • Polyimides can be supplied in various grades depending on properties required for the end product • COMMERCIALIZATION • Key raw materials prepared - anhydrides • Aircraft cable coating • High temperature adhesives for titanium • Composite matrix resin and high temperature foam • High temperature molding compound • Tougheners in printed circuit board resins 450 gallon SS polyimide reactor with filter station • GOVERNMENT/SCIENCE APPLICATIONS • HSCT - Composite matrix resins • HSCT - Structural adhesives • Prototype foam developed for reusable launch vehicle (X-33) • Developed insulation for lightweight, cost-effective aerospace electrical cable and wire 1993 Phase II, NAS1-19966 NASA Contact Company Contact : Betty Tung 518-374-9101 Email : Btung@Albany.net Langley Research Center

More Related