1 / 21

ATLAS Tile Hadron Calorimeter at UIUC

ATLAS Tile Hadron Calorimeter at UIUC. Dave Petersen, North Park University Working under HEPG Prof. Steve Errede. What, Who and Where?. A T oroidal L arge Hadron Collider A pparatus (ATLAS) Detector

raquel
Télécharger la présentation

ATLAS Tile Hadron Calorimeter at UIUC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ATLAS Tile Hadron CalorimeteratUIUC Dave Petersen, North Park University Working under HEPG Prof. Steve Errede

  2. What, Who and Where? • AToroidalLarge Hadron Collider Apparatus (ATLAS) Detector • Over 30 countries involved, from Armenia to the United States (over 30 U.S. institutions are participating) • To be built at CERN, near Geneva, Switzerland

  3. What is the LHC? • A proton will be colliding with another proton • Will achieve energy of 14 TeV, most energetic collider in the world

  4. ATLAS: A Five Story Detector • Red line is the beam pipe • Pink is the tracking detector • Gray is the Solenoid Magnet • Yellow is the Electromagnetic Calorimeter • Green is the Hadron Calorimeter • Gray tubes are muon torodial magnet • Blue is the muon detector

  5. What is UIUC doing for ATLAS? • UIUC is one of 5 institutions working on the Scintillating Tile Hadron Calorimeter • Produce ~200 full-size Submodules • Test ~3,000 Photomultiplier Tubes

  6. What is a Module? • 64 Full Modules required for TileCal • Each Module is composed of 8 full-size submodules, one half-size and one quarter-size.

  7. How does the TileCal work? • Steel absorbers separated by tiles of scintillating plastic • When the Hadronic shower, hits the scintillating tiles, they emit light in an amount proportional to the incident energy • Fiberoptics connected to the tiles carry the light to PMTs

  8. Production of Submodules • UIUC wants to finish production by May of 2002 • Currently have 49 complete • Looking to improve efficiency of operations-one of the biggest problems is the cleaning of the plates that has to be done by hand • Over 10 miles of steel required for 192 submodules

  9. Quality Steel from the Czechs • Notice the grease on these plates • Every single plate must be washed by hand • There are 192 spacers plates and 32 master plates per submodule that must be washed

  10. Stamped, Not Laser-Cut • Spacers are .004 in. thinner than design qualifications • The TileCal design calls for submodules must be within .002 in. • So we place .004 in. stickers on each individual spacer before we glue

  11. Gluing • Takes a little over 2 hours to stack and glue one submodule • Use glue machine which requires over 8,000 lines of code • Prof. Errede desires to break the 2 hour barrier (his own version of the 4 minute mile)

  12. Quality Control • After welding, various measurements must be taken to ensure that each submodule meets the design requirements • We must also check each individual slot for the tiles to make sure the tiles will fit

  13. Analysis of Quality Control • Here is a 3D graphical view of the average submodule heights broken up by points

  14. Painting - In order to rustproof • Toxic paint from the Czech Republic is used to “rustproof” the submodules • Takes over 3 days to dry • Excess paint must be ground off

  15. Ready to Ship • These submodules are ready to go to Argonne, where they will be assembled into a full module

  16. PMT Testing • UIUC will perform test on the PMT’s that will measure • PMT Performance • PMT Rate Dependence • PMT Drift/Stability/Aging Studies • UIUC will receive testing boxes shortly

  17. Test Each PMT Twice • Using LabView, UIUC will test each Hamamatsu R-7787 PMT twice, once in the Dark box and once in the Light box • Test 1 will use DC Light • Test 20 PMTs per 2 days • Test 2 will use Pulsed Light • Test 20 PMTs per day

  18. What will ATLAS show us? • The measurements taken using ATLAS will hopefully help explain these theories • Higgs Particle and Field • Grand Unified Theory

  19. Higgs Particle and Field • Higgs field is almost indistinguishable from empty space • All of space is filled with this field, and that by interacting with this field, particles acquire their masses. • Particles that interact strongly with the Higgs field are heavy, while those that interact weakly are light.

  20. Grand Unified Theory • Physicists hope to unify the weak, strong, and electromagnetic interactions

  21. Thanks To • Dr. Steven Errede • Dave Forshier • And Fred Cogswell, who when I invited him to attend this talk gave me this response

More Related