1 / 9

SHMS FEA Review

SHMS FEA Review. Prepared for: Jefferson Lab Prepared by: AMSEC LLC. Introduction. AMSEC LLC optimized the Jefferson Lab SHMS carriage design and performed a finite element analysis (FEA) Per ANSI/AISC 306-05, the following stress criteria apply: Bending Stress Allowable, σ b = 0.6* σ y

river
Télécharger la présentation

SHMS FEA Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SHMS FEA Review Prepared for: Jefferson Lab Prepared by: AMSEC LLC

  2. Introduction • AMSEC LLC optimized the Jefferson Lab SHMS carriage design and performed a finite element analysis (FEA) • Per ANSI/AISC 306-05, the following stress criteria apply: • Bending Stress Allowable, σb = 0.6*σy • For ASTM A36 Steel, σy = 36 ksi, σb = 21.6 ksi • For ASTM A572 Steel, σy = 50 ksi, σb = 30 ksi • Shear Stress Allowable, τb = 0.4*σy • For ASTM A36 Steel, σy = 36 ksi, τb = 14.4 ksi • For ASTM A572 Steel, σy = 50 ksi, τb = 20 ksi • Overstresses found will be examined with the following criteria: • Insure the overstress is a localized (peak) stress • Check to verify stress are below material yield strengths • For ASTM A36 Steel, σy = 36 ksi, τy = 0.5*σy = 18 ksi • For ASTM A572 Steel, σy = 50 ksi, τy = 0.5*σy = 25 ksi • Per Jefferson Lab, the following buckling criteria apply: • Minimum Factor of Safety on Buckling = 1.4 • Criteria applies only to buckling modes exhibiting downward gravity

  3. Full Model The majority of the carriage structure is constructed with ASTM A36 Steel Front pivot housing is constructed with ASTM A572 Steel

  4. Full Model – Maximum Von Mises Stress Overstress areas are localized and are examined further on following slides Scale is set to show elements above allowable in red

  5. Criteria Plot – Elements Above Allowable Bending Stress Maximum Von Mises Stress = 35.5 ksi, including both A36 and A572 Steel material Scale is set to show maximum stress Front pivot housing is constructed with ASTM A572 Steel

  6. Full Model – Maximum Shear Stress Overstress areas are localized and are examined further on following slides Scale is set to show elements above allowable in red

  7. Criteria Plot – Elements Above Allowable Shear Stress Maximum Shear Stress = 17.4 ksi, including both A36 and A572 Steel material Scale is set to show maximum stress Front pivot housing is constructed with ASTM A572 Steel

  8. Full Model – First Buckling Mode

  9. Conclusion • Weight of the SHMS carriage structure is approximately 103 tons, excluding concrete • The Maximum Von Mises Stress was 35.5 ksi • This was a peak stress, and was still found to be below yield • The Maximum Shear Stress was 17.4 ksi • This was a peak stress, and was still found to be below yield • The first buckling mode had a factor of safety of 1.4 • This accounts for the first real buckling mode

More Related