1 / 22

Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing. MIL-HBK-727. MIL-HBK-727. MIL-HBK-727. Feature Control Frame. Datums. Rule 1-Indivdual Feature of Size.

shania
Télécharger la présentation

Geometric Dimensioning and Tolerancing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geometric Dimensioning and Tolerancing

  2. MIL-HBK-727

  3. MIL-HBK-727

  4. MIL-HBK-727

  5. Feature Control Frame

  6. Datums

  7. Rule 1-Indivdual Feature of Size • Where only a tolerance of size is specified, the limits of size of an individual feature prescribe the extent to which variations in geometric form, as well as size, are allowed. (ASTM Y14.5-2009). • Meaning?

  8. 5±1 6 10±1 11

  9. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  10. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  11. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  12. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  13. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  14. Engineering Design Communication – Lockhart and Johnson Fundamentals of Graphics Communication – Bertoline and Weibe

  15. Engineering Design Communication – Lockhart and Johnson

  16. Fundamentals of Graphics Communication – Bertoline and Weibe

  17. Fundamentals of Graphics Communication – Bertoline and Weibe

  18. Fundamentals of Graphics Communication – Bertoline and Weibe

  19. Summary • All dimensions include controls of geometry. Rule 1 states that a size control inherently includes controls of form. • Because of Rule 1, the need for GDT callouts is minimized. Use carefully. • GDT should be used to refine the relationship between feature and form. • GDT should open tolerances. MMC should reduce part cost. Technical Graphics Communication, Bertoline, et al

More Related