SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Geometric Dimensioning and Tolerancing

kathie avatar
kathie
16 diapositives · 610 Views · Feb 26, 2014

Geometric Dimensioning and Tolerancing. Chapter 1, Introduction. History. during the early period of manufacturing there were seldom any drawings one-off manufacturing ~1798 – concept of interchangeable parts

#solid #point #simplex #regular #ichnography #volume #square #space
Geometric Dimensioning and Tolerancing - slide 1
01 / 16Geometric Dimensioning and Tolerancing
1 / 17

Télécharger la présentation

Geometric Dimensioning and Tolerancing
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Geometric Dimensioning and Tolerancing Chapter 1, Introduction

  2. History • during the early period of manufacturing there were seldom any drawings • one-off manufacturing • ~1798 – concept of interchangeable parts • Eli Whitney won a contract to supply musketsto the United States government. The firearmsmanufacture were based on the concept ofinterchangeable parts. • He made a presentation to congress by building10 guns and assembling and disassemblingthem claiming the same exact parts andmechanisms. • specifying tolerances became veryimportant Eli Whitney 1765 - 1825

  3. Tolerances • All dimensions require a tolerance. • A tolerance should be as large as possible without interfering with the function of the part to minimize production costs. • Consider how your part will be checked to see if it meets the tolerances.

  4. Tolerance Notes

  5. Plus/Minus (Limit) Tolerancing • Plus/minus tolerancing seemed to work well for many applications.

  6. Plus/Minus (Limit) Tolerancing

  7. Plus/Minus (Limit) Tolerancing

  8. Limit Tolerancing • Is the .620-.630 hole horizontal position measured from a true vertical plane or from the as built face? • A .005” tolerance on the horizontal and vertical position of the hole means that the position could be off by as much as.007”. max allowed error for hole center .007 +.005 perfect location for hole center +.005

  9. Limit Tolerancing • Limit tolerances don’t have an origin or any orientation or location relative to datums. • The datums are usually implied. • The drawings are subject to different interpretations. • Plus/minus tolerancing works well for individual features of size (ex. diameter of a shaft), but does not control the relationship between individual features very well.

  10. Limit Tolerancing

  11. Limit Tolerancing

  12. Limit Tolerancing

  13. GDT • Limit tolerancing can give the size of individual features. • GDT can provide: • relationships between features • circular tolerance zone for hole placement • GDT removes any ambiguity from the drawing specification

  14. History of Dimensioning and Tolerancing Standards in the USA Mil Std 8 1950’s Mil Std 8A Mil Std 8B Mil Std 8C-1963 ASA-Y14.5-1957 USASI Y14.5-1966 ANSI Y14.5-1973 ANSI Y14.5M-1982 ASME Y14.5M-1994 ASME Y14.5-2009

  15. Geometric Dimensioning and Tolerancing (GDT) • establish a reference coordinate system by defining datums • provide basic dimensions (perfect dimensions) relative to the datums • specify allowable tolerances

  16. communication symbols ASME clarity replace total form size & location function & relationship tolerance tolerances & interchageability plus/minus size