1 / 7

Goal of AWLC14 Source WG

Goal of AWLC14 Source WG. M . Kuriki (Hiroshima University). 13 May 2014 AWLC14, Fermilab , 12-16 May 2014. Goal of Source WG. Establish DTD(Detailed Technical Design) is our mid-term goal. Electron source Basic design is almost fixed. We go forward to the DTD. Who does?

sonya-berg
Télécharger la présentation

Goal of AWLC14 Source WG

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Goal of AWLC14 Source WG M. Kuriki (Hiroshima University) 13 May 2014 AWLC14, Fermilab, 12-16 May 2014

  2. Goal of Source WG • Establish DTD(Detailed Technical Design) is our mid-term goal. • Electron source • Basic design is almost fixed. We go forward to the DTD. • Who does? • Positron source • Basic design is partly not established. • DTD will be started after the basic design is fixed.

  3. Electron Source • NEA GaAs cathode is the baseline. • DC photo-cathode gun for compatibility to the cathode material. • Ready for DTD. • No assigned group. • Need laser development. • inherit the SLAC work? • No fundamental difficulty, but we have to develop it.

  4. Positron Source • There is no methods ready for DTD. • Undulator • Flux concentrator : technical maturity, droop on B-field and capture eff. during 1ms long pulse is expected. R&D is currently stopped. • Target : vacuum seal, technical maturity. R&D is currently stopped. • No elves for ILC (we have to work on it!). • A good management is required.

  5. Positron Source • E-driven • Basic design is not established. We have to hurry up. • Once the basic design is finished, DTD could be easier? Less pulse duration (FC), less target speed. • However, design criteria of e- driver and e+ booster should be carefully considered. • CW 300Hz operation results huge power consumption, but pulsed 300 Hz operation could be unstable. • CFS could be massive.

  6. 仕切り直し　(Shikirinaoshi)

  7. Source WG allocation

More Related