1 / 11

Gears & Spline Shafts

Gears & Spline Shafts. Sharif Ali. What are they? What are they used for?. Gears A Brief History. Began as wood with pegs and used animal fat grease as lubrication Used in wind and water wheel machinery and to power textile machinery. Gears Uses. Three main uses:.

steel-maldonado
Télécharger la présentation

Gears & Spline Shafts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gears & Spline Shafts Sharif Ali • What are they? • What are they used for?

  2. GearsA Brief History • Began as wood with pegs and used animal fat grease as lubrication • Used in wind and water wheel machinery and to power textile machinery

  3. GearsUses • Three main uses: • To change the rate of rotation of a machinery shaft • To change the direction of the axis of rotation • To change between rotary and linear motion

  4. GearsExample 1 Spur Gears Rate of Rotation • Most common type of gear • Straight teeth, parallel shafts • Can be used to create large gear reductions • Used in oscillating sprinkler, wind up alarm clock, washing machine and clothes dryer • Loud due to teeth collision

  5. Spur gears

  6. Gears Example 2 Helical Gears • Much more quiet and smooth than spur gears due to the angled cut of the teeth • Can be mounted on perpendicular shafts to adjust angle of rotation by 90o • Used in most car transmissions

  7. Helical Gears

  8. GearsExample 3 Worm Gears • Used when large gear reductions are needed • Worm can turn gear but gear cannot turn worm • Useful in conveyor systems

  9. GearsExample 4 Rack & Pinion Gears Rotation into Linear • Used in the steering system on automobiles • Also used on same scales

  10. Spline Shafts • Grooves or tongues are machined along the length of the shaft • This allows for both the shaft and another corresponding shaft or component to rotate together

  11. References • www.bergen.org • www.howstuffworks.com • www.efunda.com

More Related