1 / 22

11. Processing and fabrication

This document outlines various processing and fabrication techniques for molecular and fiber-reinforced thermoset and thermoplastic materials. Key methods discussed include laminating, vacuum bagging, injection molding—both thermosets and thermoplastics—compression molding, and advanced curing processes. The text also explores film production, foam spraying, and the use of mixing equipment for blending and compounding materials. Additionally, it includes insights on mold creation and the application of adhesives in manufacturing processes.

ulla
Télécharger la présentation

11. Processing and fabrication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 11. Processing and fabrication Orientation of molecular and fibers

  2. Reinforced thermoset processing • Laminating • - Contact pressure • Dead load

  3. Vacuum Bagging • Elastic tape • Shrink tape, sleeving, or fibers • Autoclave

  4. Hydroclaves • Inflatable bags - Spray layup

  5. Press molding • Silicone rubbers • Laminated injection molding • Filament winding

  6. Three dimensional reinforcement

  7. Prepregs • Molding thermosets • Compression molding • Transfer molding • Injection molding thermosets

  8. Reaction injection molding • Casting • Cure cycles • Curing rate

  9. Curing cure Thermoplastic processing • Injection molding

  10. Extrusion • Blow molding 1.Extrusion blow molding

  11. 2. Injection blow molding 3. Stretch blow molding

  12. 4. Blow molding materials

  13. Rotational molding • Compression molding thermoplastics • Vacuum forming • Films • Cast films • Calendering • Extrudeed flims

  14. Extrusion coating • Thermoplastic foaming processing • Polystyrene • Polyvinyl chloride • Engineering thermoplastic foam

  15. Molds Mixing equipment • Blending and compounding • Blenders • Intensive mixing dispersers • Roll mills

  16. Automatic mixing dispensing

  17. Polyester spraying

  18. Polyurethane foam spraying

  19. Polyurethane foam pouring • Portable foam packs • Urea formaldehyde foaming

  20. Adhesive application

More Related