1 / 13

Indentation Fracture and How to Apply to Thin Films

Indentation Fracture and How to Apply to Thin Films. Huai Huang. Outline. Indentation test Indentation fracture mechanics Stress field and Crack system Fracture Mechanics Analysis Fracture toughness measurement on thin film. What is Indentation test. Easy and cheap to perform:

wardah
Télécharger la présentation

Indentation Fracture and How to Apply to Thin Films

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Indentation Fracture and How to Apply to Thin Films Huai Huang

  2. Outline • Indentation test • Indentation fracture mechanics • Stress field and Crack system • Fracture Mechanics Analysis • Fracture toughness measurement on thin film

  3. What is Indentation test • Easy and cheap to perform: • Properties: • Elastic properties : Modulus • Plastic properties: Hardness • Time dependent properties: Creep • Fracture properties

  4. Hertzian Stress field • For smooth sperical indenter

  5. Hertzian cone crack However X can’t be exactly calculated

  6. Indentation Stress field For a normal point load P the stress field can be given by Boussinesq field:

  7. Radial-median crack • Under a point load

  8. Fracture Mechanics Analysis System behave like a center-loaded, half-penny crack, for which the stress intensity factor is given by: The stress field can be expressed (by Hill’s expending cavity solution) as: Combining the above two equations and assuming the crack arrests when it grows to a length at which the stress intensity factor is just equal the fracture toughness Experiment within 40% accuracy

  9. Other Fracture property • Inert Strength • Toughness-curves • Crack-velocity exponent • Crack initiation • Crack propagation

  10. Hard film on a soft substrate • Load vs displacement can be simulated as

  11. Indentation fracture for thin film • Typical loads 1000gram and crack length 100um: Small crack threshold need. • Solution: Change of indenter geometry. • Vickers indenter: threshold 25 grams • Cube corner indenter: 0.5 grams • (Same theory can be apply to different indenters) • Mechanical properties were extracted from hardness and modulus versus displacement profile minima or approximately at a depth of 10% of the film thickness.

  12. Indentation on Low K

  13. Summary • Indentation test can provide fracture property such as fracture toughness. Indentation Fracture mechanics is discussed. • Reduced crack threshold load can apply indentation test to very thin film. • Further research is need to study indentation on thinner films

More Related