SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Hydro Governor PI Controller Limits

yoland avatar
yoland
11 diapositives · 283 Views · Jul 26, 2014

Hydro Governor PI Controller Limits. Jamie Weber PowerWorld Corporation MVWG March 19, 2014. Background. Recently finished coding the H6B (H6BD) governor using documentation we received during the last MVWG meeting from John Undrill Block Diagram Pseudo-code of the model

Hydro Governor PI Controller Limits - slide 1
01 / 11Hydro Governor PI Controller Limits
1 / 17

Télécharger la présentation

Hydro Governor PI Controller Limits
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Hydro GovernorPI Controller Limits Jamie Weber PowerWorld Corporation MVWG March 19, 2014

  2. Background • Recently finished coding the H6B (H6BD) governor using documentation we received during the last MVWG meeting from John Undrill • Block Diagram • Pseudo-code of the model • The psuedo-code contained a non-windup limit on the PI controller which was not shown in the block diagram

  3. Block Diagram from John

  4. Background • I mentioned this non-windup limit to Tom Overbye • Tom Overbye at University of Illinois andMani Venkatasubramanian at Washington State have been working on a validation project as well • Validating 4 software tools • They had found similar undocumented non-windup limits on several PI controller on hydro governors in one package • Other 3 packages have implemented what is on the block diagram directly

  5. Undocumented Non-Windup Limits Kp Gmax Gmin Ki/s

  6. When does this matter • During an large frequency drop, the PI controller will be driven UP and the gmax limits will be hit. • If the frequency stays low, the gmax limit would stay active, but if the low frequency event results in a large amount of load tripping, then the frequency may go HIGH • If the PI is allowed to wind-up, then the governor will remain stuck at gmax while the PI state “unwinds” • If it was a non-windup limit it backs off immediately • Basically, it matters for really big frequency excursion events

  7. Should we all change these? • These non-windup limits make a lot of sense – seems like they should be included • PowerWorldhas modified to include an option • “Include undocumented governor PI limits” • Is this same thing occurring for other governor types?