200 likes | 583 Vues
T700 System Overview. UH-60 IPC CW4 Jim Hill. T700-GE-700. T700-GE-700 (General Specifications). Front-driven turboshaft 1,622 SHP, SL, STD Day, 20,900 Np (1,546 according to some references) 437 pounds, dry weight
E N D
T700 System Overview UH-60 IPC CW4 Jim Hill
T700-GE-700(General Specifications) • Front-driven turboshaft • 1,622 SHP, SL, STD Day, 20,900 Np • (1,546 according to some references) • 437 pounds, dry weight • Axial/centrifugal compressor with variable geometry inlet guide/stator vanes
Engine Modules • Cold Section • Hot Section • Power Turbine Section • Accessory Section
Cold Section Components • Inlet Particle Separator • Swirl Frame • Scroll Case • Front, Midframe, and Main Frame Cases • Compressor • Diffuser
Cold Section LRU’s • Electrical Control Unit (ECU) • Anti-Icing and Start Bleed Valve • History Recorder • Ignition System • Electrical Cables
Hot Section Components • Combustion Liner • First Stage Nozzle Assembly • Gas Generator Stator • Two Gas Generator Turbine Rotors
Hot Section LRU’s • Igniters • Primer Nozzles
Power Turbine Section Components • Two Stage Power Turbine Rotors • Power Turbine Drive Shaft • High Speed Shaft
Power Turbine Section LRU’s • TGT Harness • Torque and Over-speed Sensor • Np Sensor
Accessory Module LRU’s(Front Face) • Alternator • Fuel Filter • Fuel Boost Pump (engine driven) • Oil Filter • Oil Pump • Oil Cooler (liquid to liquid) • Oil Pressure and Temperature Sensors • Chip Detector
Accessory Module LRU’s(Rear face) • Starter • Hydro-mechanical Unit (HMU) • Inlet Particle Separator (IPS) Blower • Pressurizing and Over-speed Unit (POU)
Review and Evaluation • Cold Section Module • Hot Section Module • Power Turbine Module • Accessory Module