1 / 4

Rigaku Rotary Assembly

Rigaku Rotary Assembly. Top View shows “Inlet” side. This couples with 4-ea ¾“ bolts to “Offset” flange. This flange has central hole 1” offset from center. Bottom View shows “Outlet” side. This couples with twin flanges using 18-ea holes 10-32 tapped holes

filia
Télécharger la présentation

Rigaku Rotary Assembly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RigakuRotaryAssembly Top View shows “Inlet” side. This couples with 4-ea ¾“ bolts to “Offset” flange. This flange has central hole 1” offset from center. Bottom View shows “Outlet” side. This couples with twin flanges using 18-ea holes 10-32 tapped holes Both ends of Rigaku assembly has o-ring groves. So end-flanges only need polished surfaces

  2. Inlet Side of Rigaku Assembly Center section in recessed from outer edge. Outer bolt holes: 4-ea (3/4”) on 7” diameter circle. O-ring groove has ID=5¾“. Recessed portion of surface has an OD=5½”. Central hole = 3.0”. Mating flange should be offset exactly 1.0”.

  3. “Offset Flange” (inlet side) 4 ea ¾” holes Centers 7” Dia. (not tapped) Transmission Hole is 3” dia., 1” offset Polish one side For o-ring surface ID = 5½”, OD = 6”

  4. Outlet Side of Rigaku Assembly • 18 Blind-tapped holes, 10-32 (4¼“ bolt hole radius) • O-ring grove diameter is: ID= 3” , OD = 3 3/8”

More Related