1 / 10

Floor Jacks and Stands

Floor Jacks and Stands. Harkness Career Center. Floor Jacks Parts Identification. Jack Operation. Increase pressure when small piston moves a larger one Hydraulic jack has a fluid reservoir and two one-way check valves Twisting the handle controls fluid pressure

fineen
Télécharger la présentation

Floor Jacks and Stands

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Floor Jacks and Stands Harkness Career Center

  2. Floor Jacks Parts Identification

  3. Jack Operation • Increase pressure when small piston moves a larger one • Hydraulic jack has a fluid reservoir and two one-way check valves • Twisting the handle controls fluid pressure • Position the jack under the vehicle frame

  4. Floor Jacks • Are used to lift the corner or one side of a vehicle • Has NO safety locks • Vehicles can be rolled on a floor jack • Floor jacks should always be used with jack stands

  5. Jack Stands • Stands have no lifting function • Are used to secure vehicles in the air • Can be height adjusted • Must be used every time with a jack

  6. Shop Crane (Cherry Picker) • Is used to lift engines and heavy items to move them • Has NO safety locks • (NEVER GET UNDER ANYTHING LIFTED BY A CRAINE) • Can carry up to 2 tons • Keep loads as low as possible when transporting

  7. Electric/Hydraulic Press • Used to press together parts • Can be capible of 30 to 60 tons of pressure • Can easily bend or shatter metal • Can easily cause damage to parts of personal injury

  8. Engine Stand • Are use to hold engines up for disassembly • Engines must be centered to the mounting flange • The correct mounting bolts a washers must be used • Will allow the engine to be turned

  9. Transmission Jack • Is a tall jack on rollers and an adjustable saddle • Can be air or hydraulic operated • Used to remove fuel tanks, transmissions, differentials from a vehicle on a lift • Can be wobbly when fully extended

  10. Chainfall (chain hoist) • Slide along a beam secured to the ceiling • Has two chains • One to raise and lower • One to pick the weight up • Will lock in place and suspend load

More Related