1 / 9

Incorporating NAESB Standards for Wholesale Demand Response and Energy Efficiency

This project amends Schedule 24 to include NAESB Standards, impacting energy efficiency and demand response in North America. Understand the new standards and compliance requirements.

kapono
Télécharger la présentation

Incorporating NAESB Standards for Wholesale Demand Response and Energy Efficiency

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. May 28, 2013 Eric Winkler, Ph.D. Project Manager, Demand Resources Schedule 24 Amendment to Incorporate North American Energy Standards Board Standards for Wholesale Demand Response and Energy Efficiency

  2. Overview • FERC Order No. 676-G adopting NAESB Standard for Wholesale Demand Response (Phase II) and Energy Efficiency (February 21, 2013) • Summary of WEQ 015 and 021 • ISO-NE Compliance with Order • Schedule for stakeholder review of Schedule 24 revision

  3. Order No. 676-G • FERC NOPR RM05-5-020 (April 19, 2012) • Requires ISO/RTOs to revise their OATTs to incorporate by reference the NAESB Phase II Demand Response and Energy Efficiency Measurement and Verification (M&V) Standards • M&V Standards became effective May 6, 2013 • OATT revisions incorporating M&V Standards can be included as part of an unrelated tariff filing • ISO-NE will be incorporating the M&V Standards in Schedule 24 • Revision will be included in filing this summer • No waiver filing required

  4. Summary of Demand Response M&V Standards WEQ-015* Introduction Applicability Overview Performance Evaluation Methodology Definition of Terms (see NAESB WEQ Business Practice Standards WEQ-000, Abbreviations, Acronyms, and Definition of Terms) Provision of Wholesale Electric Demand Response Energy Products Applicability Purpose 015-1.0 General Provision of Wholesale Electric Demand Response Capacity Products Applicability Purpose 015-1.4 General * Standards numbering is confusing 4

  5. Summary of Demand Response M&V WEQ-015 (cont) Provision of Wholesale Electric Demand Response Reserve Products Applicability Purpose015-1.8 General Provision of Wholesale Electric Demand Response Regulation Products Applicability Purpose 015-1.12 General 015-1.16 Maximum Base Load Evaluation 015-1.19 Meter Before / Meter After 015-1.22 Baseline Type-I (Interval Meter) 015-1.25 Baseline Type-II (Non-Interval Meter) 015-1.28 Metering Generator Output 5

  6. Summary of Energy Efficiency M&V WEQ-021 • WEQ-000 Definition of Terms • 021-1 Introduction (which was not incorporated by the Commission) • 021-2 Applicability (which was not incorporated by the Commission) • 021-3 Business Practice Standards • 021-3.1 Energy Efficiency Resource Use Criteria in Wholesale Markets • 021-3.2 General Measurement and Verification Plan Requirements • 021-3.3 Post Installation M&V Report Components* • 021-3.4 Performance Reporting • 021-3.5 M&V Supporting Documents • 021-3.6 M&V Methodologies • 021-3.7 Energy Efficiency Baseline Conditions • 021-3.8 Statistical Significance • 021-3.9 Nominated Energy Efficiency Value Calculations / Demand Reduction Value Calculations • 021-3.10 Measurement and Monitoring • 021-3.11 Measurement Equipment Specification • 021-3.12 Data Validation 6

  7. ISO Compliance With Order • Completed review of compliance with both standards • Revision to Schedule 24 of the OATT as follows: Measurement and Verification of Wholesale Electricity Demand Response (WEQ-015, 2010 Annual Plan Items 4(a) and 4(b), March 21, 2011); and Measurement and Verification of Wholesale Electricity Efficiency (WEQ-021 2010 Annual Plan Item 4(d), July 16, 2012; and excluding 021-1 through 021-1.1; and 021-2 through 021-2.1.3.

  8. Schedule for Stakeholder Review May 28, 2013 TC Meeting – ISO-NE’s initial presentation of revision to Schedule 24 to comply with Order No. 676-G Next TC Meeting – ISO-NE’s second presentation of revision to Schedule 24, and TC action July 2013 PC Meeting – PC action on Schedule 24 revision

  9. Contact Information Eric Winkler, Ph.D. Resource Analysis and Administration ISO New England Email: ewinkler@iso-ne.com

More Related