1 / 30

Titrations

Titrations. Acid-base indicators are…. Compounds whose color is sensitive to pH. Either weak acids or weak bases. pH paper is a universal indicator. It is made by soaking the paper in several different indicators. Phenolphthalein.

leyna
Télécharger la présentation

Titrations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Titrations

  2. Acid-base indicators are… • Compounds whose color is sensitive to pH. • Either weak acids or weak bases. • pH paper is a universal indicator. It is made by soaking the paper in several different indicators.

  3. Phenolphthalein • An indicator that changes color from clear in acid to pink in base (pH 8-10). • This is the indicator that we will use in the lab during titrations.

  4. Titrations • The controlled addition and measurement of the amount of a solution of known concentration (NaOH) required to react completely with a measured amount of a solution of unknown concentration (HCl). • Neutralization: A + B  Salt + H2O • The point of neutralization is the endpoint = change in color of indicator

  5. Good color! Too much base!

  6. Drill #10 5/7, 5/8/14 • Fill in the following table. Need to use your scientific calculator.

  7. 11 3.0 1.0×10-3M 1.0×10-11M 2.0 12 1.0×10-2M 1.0×10-12M 8 6 1×10-8M 1×10-6M 10.8 3.22 6.00×10-4M 1.67×10-11M 13 .70 2.0×10-1M 5.0×10-14M 2.22 11.8 6.00×10-3M 1.67×10-12M

  8. 11 3.0 1.0×10-3M 1.0×10-11M 2.0 12 1.0×10-2M 1.0×10-12M 8 6 1×10-8M 1×10-6M 10.8 3.22 6.00×10-4M 1.67×10-11M 13 .70 2.0×10-1M 5.0×10-14M 2.22 11.8 6.00×10-3M 1.67×10-12M

  9. Agenda • Go over Titration Curve Graph • Acid and Base strength • Titration Calculation Problems • Titration Lab

  10. Homework • Titration Problems • Titration Lab

  11. Titration Curve for strong acid & strong base

  12. Equivalence Point • The point at which the two solutions used in a titration are present in equal amounts • Amount of acid in moles = Amount of base in moles • This can be found using an indicator – in a perfect world, the endpoint (point at which the indicator changes color) would be the same. *Note: this is not the same volume or the same concentration, just the same MOLES

  13. Equivalence Point • Strong acid + strong base = equivalence point at pH of 7 • Strong acid + weak base = equivalence point at pH of <7 • Weak acid + strong base = equivalence point at pH of >7

  14. How to solve titration problems: • Write the balanced neutralization equation • Solve for moles of given (using molarity and volume) • Convert from moles of given to moles of unknown using mole ratio • Use moles of unknown to solve for molarity or volume. NOTE: If moles are equivalent (coefficients) then: MAVA =MBVB

  15. Assignment • Titration Problems

  16. Titration Lab • Place 5 ml of HCl in Erlenmeyer flask • Add 2 drops of phenolphthalein indicator to the flask • Take an initial volume buret reading • Place sheet of white paper under flask during titration • Titrate with .50 M NaOH until you get a pale pink color that stays pink for about 10 secs • Make sure you carefully swirl flask after each titration • If you think you have reached the endpoint, record final volume of NaOH.

  17. Sample Titration Prob • Record calculations on half sheet of paper.

  18. Drill #18 5/24 & 28/13 • A student titrates a 20 ml sample of a solution of HBr with unknown molarity. The titration requires 20.05 ml of a 0.1819 M solution of NaOH. What is the molarity of the HBr solution? • Answer: 0.1824 M • A 35 ml sample of ammonium hydroxide is titrated to the end point with 54.95 ml of a 0.400 M sulfuric acid. What is the molarity of the ammonium hydroxide? • Answer: 1.26 M

  19. Agenda • Go over Review Packet • Test

  20. Drill #16 5/22 & 23/13 Calculate the pH for the following solutions and indicate whether the solution is acidic (A), basic (B), or neutral (N). • [H+] = 1 x 10-2 M • [OH-] = 1 x 10-2 M • [OH-] = 1 x 10-8 M • [H+] = 1 x 10-6 M What are the [OH-] for solutions with the following ph values? 5. 4.0 6. 8.0

  21. Drill #16 5/22 & 23/13 Calculate the pH for the following solutions and indicate whether the solution is acidic (A), basic (B), or neutral (N). • [H+] = 1 x 10-2 M – 2, A • [OH-] = 1 x 10-2 M – 12, B • [OH-] = 1 x 10-8 M – 6, A • [H+] = 1 x 10-6 M – 6, A What are the [OH-] for solutions with the following ph values? 5. pH = 4.0; pOH = 10; [OH-] = 1 x 10-10 M 6. pH = 8.0; pOH = 6; [OH-] = 1 x 10-6 M

  22. Drill #17 5/22 & 23/13Write the names for the following acids and bases: a) KOH b) HF c) H2SO3 d) Fe(OH)2 e) HCN Write the formulas for the following acids: a) phosphorous acid b) hydrobromic acid c) carbonic acid

  23. Drill #17 5/22 & 23/13Write the names for the following acids and bases: a) KOH - potassium hydroxide b) HF - hydrofluoric acid c) H2SO3 - sulfurous acid d) Fe(OH)2 – iron (II) hydroxide e) HCN - hydrocyanic acid or cyanic acid Write the formulas for the following acids: a) phosphorous acid - H3PO3 b) hydrobromic acid - HBr c) carbonic acid - H2CO3

  24. Agenda • Titration Calculations • Titration Lab (4B – postponed until next wk) Announcements • Turn in Naming Bases and Crossword Puzzle • Test next class.

  25. If we know the molarity and the volume of acid used, then can we calculate the amount of moles of acid? How? • MolA = MAVA

  26. Worksheet!

  27. Green workbook, pg. 272 -275

  28. Test Topics • Properties of acids, bases, and salts • Bronsted-Lowry definition of acids/bases • Amphoteric substance • Neutralization reaction – must be balanced • Purpose of calculating an Acid or Base dissociation constant • Naming acids • Equations for pH, pOH, [H+], and [OH-] • Titration calculations

  29. Objective • SWBAT calculate molarity of acid using data from titration.

More Related