1 / 21

KX-TDA200/100 System ( Production Version 2.02 )

KX-TDA200/100 System ( Production Version 2.02 ). Panasonic Communications Co., Ltd. Office Network Company Edition 1.0 31 May, 2006. Chapter 7 Additional Improvement. Index. 1. QSIG-CT/CF for IP-GW 2. E1 Card for TDA30 3. Virtual Slot for walking extension

max
Télécharger la présentation

KX-TDA200/100 System ( Production Version 2.02 )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-TDA200/100 System(Production Version 2.02) Panasonic Communications Co., Ltd. Office Network Company Edition 1.0 31 May, 2006 Chapter 7Additional Improvement

  2. Index 1. QSIG-CT/CF for IP-GW 2. E1 Card for TDA30 3. Virtual Slot for walking extension 4. No call drop after privacy release (, busy override & conference) 5. Automatic answer for transferred call

  3. Function 1. QSIG-CT/CF for IPGW

  4. 1.QSIG-CT/CF for IPGW (1/1) QSIG-CT: Yes Anti-trombone connection: Enable Unscreened call transfer: Impossible recall QSIG-CT: No Anti-trombone connection: Disable Unscreened call transfer: Possible Additional property Card Property – IP Gateway

  5. Function 2. E1 Card for TDA30

  6. 2.E1 Card for TDA30 (1/1) Port Property – E1 Port E1 DID max.15 digits

  7. Function 3. Virtual Slot for walking extension

  8. 3.Virtual Slot for walking extension (1/1) Sales Company Level Virtual Slot for TDA100 for walking extension Without using physical slot, You can use dummy card on slot 7-11 Normal Level Sales Company Level Normal Level Virtual Slot Sales Company Level Type:TDA100

  9. Function 4. No call drop after privacy release (, busy override & conference)

  10. 4.No call drop after privacy release (1/5) (1)Description When the coordinator of a conference leaves an extension-extension-CO 3 party conference without pressing the transfer key, the other extension can continue talking with the CO.

  11. 4.No call drop after privacy release (2/5) (2)Sample configuration Ver.1 - Ver.2.00 - Ext. A established three party conference. (Ext.B and Ext.C) - When Ext. A wishes to leave the conference, - Ext. A press the transfer button. - And Ext. A on hooks. (Without pressing the transfer button, the three party conference is disconnected.) (A) Press TRANSF Then oh-hook 2 party conversation Coordinator (owner) of conference B B A C A All disconnect C B A C (A) On-hook Without TRANSF

  12. 4.No call drop after privacy release (3/5) Ver.2.02 - Ext. A established three party conference. (Ext.B and Ext.C) - When Ext. A wishes to leave the conference, - Just Ext. A on-hooks. Two party connection (Ext.B and C) is not disconnected. Coordinator (owner) of conference B 2 party conversation (A) Just on-hook B A A C C

  13. 4.No call drop after privacy release (4/5) (3)Programming - No programming is necessary.

  14. 4.No call drop after privacy release (5/5) (4)Condition - For the details, refer “1.4.5 Multiple Party Conversation” Leaving a Conference (Leaving Three-party Conference) in User guide. - This is not necessary Upgrade SD card(KX-TDA0920).

  15. Function 5. Automatic answer for transferred call

  16. 5.Automatic answer for transferred call (1/5) (1)Description Automatic answer is available for transferred CO calls (not including direct CO calls), in addition to direct extension calls. If the CO is analog, screened transfer is strongly recommended for this feature in order to disable connections between absent extensions and COs. System programming is required for this feature.

  17. 5.Automatic answer for transferred call (2/5) (2)Sample configuration Automatic answered CO call loses chance to be disconnected by the extension because user is not there !!! CPC and Polarity Reversal are not supported !! Auto Answer Absent… Analog CO Unscreened Transfer Keep busy !! Ver.1 - Ver.2.00 Traditionally, Automatic Answer function of PT does not work on our PBX for the transferred call if the original is CO incoming call because it can cause the useless use of CO port which is never released. (CO port lockup problem)

  18. 5.Automatic answer for transferred call (3/5) Automatic answered CO call can be disconnected by the disconnection signal of the caller if it is supported by PSTN. CPC or Polarity Reversal are supported Auto Answer Absent… Standard disconnect signal Analog CO ISDN, E1/T1 Released by disconnection signal Unscreened Transfer Ver.2.02 But if disconnection signal triggered by the on-hook of the caller is supported by PSTN, the CO port can be released by it. Because the disconnection signal service became common by the expansion of the digital line, we allow the user to select the response for "Auto Answer for the transfer call" as option.

  19. 5.Automatic answer for transferred call (4/5) (3)Programming 2.System – 9.System Option 2.System Option 4 9.System Option Disable: Default Enable: Option

  20. 5.Automatic answer for transferred call (5/5) (4)Condition - For the details, refer “1.4.1.4 Hands-free Answerback” in Feature guide. - This is not necessary Upgrade SD card(KX-TDA0920). - If disconnection signal is not supported by PSTN, or if KX-TDA is not configured for receiving the disconnection signal from PSTN, the enabled "Automatic answer for transfer call" will cause the first mentioned useless CO busy(CO port lockup) problem. - You must use this function after understanding this risk.

  21. Chapter 7Additional Improvement Thank you very much !

More Related