1 / 15

ANALOG FILTERS

ANALOG FILTERS. ELEC 202 Circuit Analysis II. A frequency-selective device or circuit designed to pass signals with desired frequencies and reject or attenuate signals with unwanted frequencies Limit the frequency spectrum of a signal to some specified band of frequencies

nailah
Télécharger la présentation

ANALOG FILTERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ANALOG FILTERS ELEC 202 Circuit Analysis II

  2. A frequency-selective device or circuit designed to pass signals with desired frequencies and reject or attenuate signals with unwanted frequencies • Limit the frequency spectrum of a signal to some specified band of frequencies • Applications in communications and control systems Definition

  3. Lowpass – passes low frequencies and stop high frequencies • Highpass – passes high frequencies and rejects low frequencies • Bandpass – passes frequencies within a certain band and blocks frequencies outside the band • Bandstop – passes frequencies outside a certain band and blocks frequencies within the band Types of Filters

  4. Lowpass Filter Highpass Filter Bandpass Filter Bandstop Filter

  5. Passive vs. Active Filters A passive filter consists of only passive elements (e.g., R, L, and C). An active filter consists of active elements (e.g., transistors and op amps) in addition to passive elements.

  6. Cutoff Frequency The frequency at which the frequency response drops in magnitude to 70.71% (or 3dB) of its maximum value. Or, the frequency at which the output power of the filter is half of the maximum input power  half-power frequency Also called corner frequency or roll-off frequency Obtained by setting the magnitude of to

  7. Lowpass Filter Designed to pass only frequencies from dc up to the cutoff frequency.

  8. Highpass Filter Designed to pass all frequencies above its cutoff frequency.

  9. Example What type of passive filter does the following circuit represent? Also, calculate its cutoff frequency.

  10. Example For the circuit shown, identify the type of filter it represent by obtaining and calculate its corner frequency.

  11. Bandpass Filter Designed to pass all frequencies within a certain Band of frequencies.

  12. Bandpass Filter

  13. Bandstop Filter Designed to stop all frequencies within a certain band of frequencies.

  14. Bandstop Filter

  15. Narrowband vs. Wideband Rule of thumb: If the 3-dB bandwidth of a bandpass filter is more than twice the center frequency, the filter is said to be wideband. Examples of narrowband filters: Resonator, Comb filters, notch filters, inverse comb filters

More Related