1 / 55

CNC Turning

CNC Turning. Module 3: CNC Turning Machine. Watch the following video. Module Objectives. Describe the main parts of the EMCO CNC turning machine. Operate the EMCO CNC turning machine. Identify the main reference points on the EMCO CNC turning machine.

norbertoc
Télécharger la présentation

CNC Turning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CNC Turning Module 3: CNC Turning Machine

  2. Watch the following video

  3. Module Objectives • Describe the main parts of the EMCO CNC turning machine. • Operate the EMCO CNC turning machine. • Identify the main reference points on the EMCO CNC turning machine. • Distinguish the main control keys and their functions. • Run the spindle of the Emco machine to a specific speed. • Reference the machine in X and Z. • Select the proper mode to move the tool turret in X and Z. • Set the required tool in the active position. • Decrease/Increase the feed rate in a specific percentage.

  4. Main parts of the Turning (Lathe) machine

  5. Main parts of the Turning (Lathe) machine:

  6. Main parts of the Turning (Lathe) machine:

  7. Points on the CNC Machine

  8. Points on the CNC Machine Machine Zero Point Work piece Zero Point Tool Holder Zero Point Reference Zero Point

  9. Switching the Machine ON and OFF

  10. To switch the machine ON: - Open air supply • Switch on the main switch at the E-cabinet - Turn on the PC - Launch Control Software - Open and close the chip guard door once for checking the door safety switch

  11. To switch the machine OFF: - Terminate control software - Terminate Windows • Switch off main switch - Lock air supply

  12. Main Control Keys

  13. Machine control keyboard: Machine control keyboard of the EMCO PC-Turn Series

  14. Machine control keyboard of the EMCO PC-Turn Series Skip blocks will not be executed

  15. Machine control keyboard of the EMCO PC-Turn Series Test run of programs, in which the program will run while the spindle is not rotating and there is no workpiece in the clamping device.

  16. Machine control keyboard of the EMCO PC-Turn Series Reset

  17. Machine control keyboard of the EMCO PC-Turn Series Stop the program

  18. Machine control keyboard of the EMCO PC-Turn Series Start the program

  19. Machine control keyboard of the EMCO PC-Turn Series Manual axis direction movement

  20. Machine control keyboard of the EMCO PC-Turn Series Approaching the reference point in all axes

  21. Machine control keyboard of the EMCO PC-Turn Series Open / Close door

  22. Machine control keyboard of the EMCO PC-Turn Series Open / Close clamping device

  23. Machine control keyboard of the EMCO PC-Turn Series Swivel tool turret

  24. Machine control keyboard of the EMCO PC-Turn Series Coolant/ Puff Blowing On / Off

  25. Machine control keyboard of the EMCO PC-Turn Series Spindle speed override (increase or decrease the spindle speed)

  26. Machine control keyboard of the EMCO PC-Turn Series Feed override switch (increase or decrease the feed rate)

  27. Machine control keyboard of the EMCO PC-Turn Series Mode selector provides several operating modes : REF, MEM, EDIT, MDI, JOG, and INC mode

  28. Machine control keyboard of the EMCO PC-Turn Series REF: Referencing Manual referencing - Press the –Z or +Z key: the slide traverses to the reference point in Z. - Press the -X or +X key: the slide traverses to the reference point in X.

  29. Machine control keyboard of the EMCO PC-Turn Series REF: Referencing Automatic referencing: - Select REF Mode: - Press the reference key : The slides traverse to the reference point in both axis, one after the other.

  30. Machine control keyboard of the EMCO PC-Turn Series MEM (Memory Mode): To run the program in automatic mode.

  31. Machine control keyboard of the EMCO PC-Turn Series EDIT: Allows the addition, modification, and deletion of programs.

  32. Machine control keyboard of the EMCO PC-Turn Series MDI: (Manual Data Input): Is used when the user wishes to manually input program commands into the system. The programs are typed directly into the system via MDI keypad.

  33. Examples To run the spindle at 1000 RPM in clockwise direction

  34. Example solution Close the door Select MDI mode Press the [PROG] from function keys Use Data Input Keys to write the following block: S1000 M3 (then press INPUT key) Press Start Press reset to stop the program

  35. Example solution Press POS • JOG: In this mode the slides can be moved in one axis at a time by use of the Axis Direction Keys. • INC (Incremental): In this mode the slides can be moved certain distances in micron.

  36. Notes The machine is switched off by means of the main switch. It is recommended to switch off the machine only in inoperative position of the tool turret. Operation is interrupted by means of the reset key. All current machine functions are interrupted with RESET.

  37. Function Keys

  38. Function Keys Function Keys enable the user to know the current positions of the tool, deal with programs, make the necessary setting e.g workpiece and tool settings, control program simulation, .… etc.

  39. Data Input keys

  40. Data input keys Data input keys runs several functions (numbers, address characters).

  41. Machine Practical Tasks (Before performing these tasks, the tools on the turret should be checked for any expected collision with the chuck)

  42. Machine Task 1 • Select Reference mode (door closed/Chuck closed) • Reference the machine in X • Reference the machine in Z • Open the door • Close the door • Open the door • Open / close the chuck • Select “JOG” mode • Increase the feed rate to 110% (Use feed rate override) • Decrease the feed rate to 90% • Move the turret in positive Z

  43. Machine Task 1 • Check the tools on the turret for any expected collision, then Rotate • the turret to make tool number 5 active. • Decrease the feed rate to 20% • Move the turret in negative Z • Increase the feed rate to 100% • Move the turret in positive Z • Move the turret in negative X • Move the turret in positive X

  44. Machine Task 1 • Switch coolant (air) ON • Switch coolant OFF • Select reference mode • “press automatic referencing button”

  45. Machine Task 2

  46. Machine Task 2 • Select JOG mode • Move the turret in positive Z • Adjust the feed rate to 80% • Move the turret in negative Z • Move the turret in positive Z • Move the turret in positive X • Move the turret in negative X • Select MDI mode (While door is closed) • On (Function Keys), Press “Program” • Use the (The data input keys) to write “S1500 M3” then press “INPUT”

  47. Machine Task 2 • Press “Start program” • Increase the speed to 120% • Decrease the speed to 80% • Set speed to 1000 RPM (100%) • Stop the program (Reset) • Press POS • Select Jog mode • Move the turret in positive Z • Select MDI mode (While door is closed) • On (Function Keys), Press “Program”

  48. Machine Task 2 • Write T0303, then press INPUT (Check the turret for any possible tool collision with the chuck) • start the program • Stop the program (Reset) • Select tool no.7 to be the active tool, then press “reset” • Press POS. • Select Reference mode • Reference the machine in X • Reference the machine in Z”

  49. Practical Tasks on MTS

More Related