1 / 51

Chapter 26 DC Circuits

Chapter 26 DC Circuits. 26-2 Resistors in Series and in Parallel. This gives the reciprocal of the equivalent resistance:. 26-2 Resistors in Series and in Parallel.

vneely
Télécharger la présentation

Chapter 26 DC Circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 26DC Circuits

  2. 26-2 Resistors in Series and in Parallel This gives the reciprocal of the equivalent resistance:

  3. 26-2 Resistors in Series and in Parallel An analogy using water may be helpful in visualizing parallel circuits. The water (current) splits into two streams; each falls the same height, and the total current is the sum of the two currents. With two pipes open, the resistance to water flow is half what it is with one pipe open.

  4. R1 = 4 W R2 = 2 W 12 V ConcepTest 26.1 Series Resistors 1)12 V 2)zero 3)6 V 4) 8 V 5) 4 V In the circuit below, what is the voltage across R1?

  5. R1 = 4 W R2 = 2 W 12 V ConcepTest 26.1 Series Resistors 1)12 V 2)zero 3)6 V 4) 8 V 5) 4 V In the circuit below, what is the voltage across R1? The voltage drop across R1 has to be twice as big as the drop across R2. This means that V1 = 8 V and V2 = 4 V. Or else you could find the current I = V/R = (12 V)/(6 W) = 2 A, and then use Ohm’s law to get voltages. Follow-up: What happens if the voltage is doubled?

  6. ConcepTest 26.2 Parallel Resistors 1)increases 2)remains the same 3)decreases 4) drops to zero Points P and Q are connected to a battery of fixed voltage. As more resistors R are added to the parallel circuit, what happens to the total current in the circuit?

  7. ConcepTest 26.2 Parallel Resistors 1)increases 2)remains the same 3)decreases 4) drops to zero Points P and Q are connected to a battery of fixed voltage. As more resistors R are added to the parallel circuit, what happens to the total current in the circuit? As we add parallel resistors, the overall resistance of the circuit drops. Since V = IR, and V is held constant by the battery, when resistance decreases, the current must increase. Follow-up: What happens to the current through each resistor?

  8. 26-2 Resistors in Series and in Parallel Conceptual Example 26-2: Series or parallel? (a) The lightbulbs in the figure are identical. Which configuration produces more light? (b) Which way do you think the headlights of a car are wired? Ignore change of filament resistance R with current.

  9. 26-2 Resistors in Series and in Parallel Example 26-4: Circuit with series and parallel resistors. How much current is drawn from the battery shown?

  10. 26-2 Resistors in Series and in Parallel Conceptual Example 26-3: An illuminating surprise. A 100-W, 120-V lightbulb and a 60-W, 120-V lightbulb are connected in two different ways as shown. In each case, which bulb glows more brightly? Ignore change of filament resistance with current (and temperature).

  11. 26-2 Resistors in Series and in Parallel Example 26-5: Current in one branch. What is the current through the 500-Ω resistor shown?

  12. 26-2 Resistors in Series and in Parallel Conceptual Example 26-6: Bulb brightness in a circuit. The circuit shown has three identical lightbulbs, each of resistance R. (a) When switch S is closed, how will the brightness of bulbs A and B compare with that of bulb C? (b) What happens when switch S is opened? Use a minimum of mathematics in your answers.

  13. 26-2 Resistors in Series and in Parallel Example 26-7: A two-speed fan. One way a multiple-speed ventilation fan for a car can be designed is to put resistors in series with the fan motor. The resistors reduce the current through the motor and make it run more slowly. Suppose the current in the motor is 5.0 A when it is connected directly across a 12-V battery. (a) What series resistor should be used to reduce the current to 2.0 A for low-speed operation? (b) What power rating should the resistor have?

  14. 26-2 Resistors in Series and in Parallel Example 26-8: Analyzing a circuit. A 9.0-V battery whose internal resistance r is 0.50 Ω is connected in the circuit shown. (a) How much current is drawn from the battery? (b) What is the terminal voltage of the battery? (c) What is the current in the 6.0-Ω resistor?

  15. ConcepTest 26.4 Circuits 1) twice as much 2) the same 3) 1/2 as much 4) 1/4 as much 5) 4 times as much The three lightbulbs in the circuit all have the same resistance of1 W . By how much is the brightness of bulb B greater or smaller than the brightness of bulb A? (brightness  power) 10 V

  16. ConcepTest 26.4 Circuits 1) twice as much 2) the same 3) 1/2 as much 4) 1/4 as much 5) 4 times as much The three lightbulbs in the circuit all have the same resistance of1 W . By how much is the brightness of bulb B greater or smaller than the brightness of bulb A? (brightness  power) We can use P = V2/R to compare the power: PA= (VA)2/RA = (10 V)2/1 W= 100 W PB = (VB)2/RB = (5 V)2/1 W= 25 W 10 V Follow-up: What is the total current in the circuit?

  17. R1 S R3 R4 V R2 ConcepTest 26.5 More Circuits 1) increases 2) decreases 3) stays the same What happens to the voltage across the resistor R4 when the switch is closed?

  18. ConcepTest 26.5 More Circuits R1 B A S R3 R4 V R2 C 1) increases 2) decreases 3) stays the same What happens to the voltage across the resistor R4 when the switch is closed? We just saw that closing the switch causes an increase in the voltage across R1 (which is VAB). The voltage of the battery is constant, so if VAB increases, then VBC must decrease! Follow-up:What happens to the current through R4?

  19. 26-3 Kirchhoff’s Rules Some circuits cannot be broken down into series and parallel connections. For these circuits we use Kirchhoff’s rules.

  20. 26-3 Kirchhoff’s Rules Junction rule: The sum of currents entering a junction equals the sum of the currents leaving it.

  21. 26-3 Kirchhoff’s Rules Loop rule: The sum of the changes in potential around a closed loop is zero.

  22. 26-3 Kirchhoff’s Rules • Problem Solving: Kirchhoff’s Rules • Label each current, including its direction. • Identify unknowns. • Apply junction and loop rules; you will need as many independent equations as there are unknowns. • Solve the equations, being careful with signs. If the solution for a current is negative, that current is in the opposite direction from the one you have chosen.

  23. 26-3 Kirchhoff’s Rules Example 26-9: Using Kirchhoff’s rules. Calculate the currents I1, I2, and I3 in the three branches of the circuit in the figure.

  24. 5 A P 8 A 2 A ConcepTest 26.9Junction Rule 1) 2 A 2) 3 A 3) 5 A 4) 6 A 5) 10 A What is the current in branch P?

  25. ConcepTest 26.9Junction Rule 1) 2 A 2) 3 A 3) 5 A 4) 6 A 5) 10 A What is the current in branch P? The current entering the junction in red is 8 A, so the current leaving must also be 8 A. One exiting branch has 2 A, so the other branch (at P) must have 6 A. 5 A S P 8 A 6 A Junction 2 A

  26. ConcepTest 26.10Kirchhoff’s Rules 1) both bulbs go out 2) intensity of both bulbs increases 3) intensity of both bulbs decreases 4) A gets brighter and B gets dimmer 5) nothing changes The lightbulbs in the circuit are identical. When the switch is closed, what happens?

  27. ConcepTest 26.10Kirchhoff’s Rules 24 V Follow-up:What happens if the bottom battery is replaced by a 24 V battery? 1) both bulbs go out 2) intensity of both bulbs increases 3) intensity of both bulbs decreases 4) A gets brighter and B gets dimmer 5) nothing changes The lightbulbs in the circuit are identical. When the switch is closed, what happens? When the switch is open, the point between the bulbs is at 12 V. But so is the point between the batteries. If there is no potential difference, then no current will flow once the switch is closed!! Thus, nothing changes.

  28. 1  I2 2  6 V 2 V 2 V 4 V I3 I1 1  3  ConcepTest 26.12 MoreKirchhoff’s Rules 1) 2 – I1 – 2I2 = 0 2) 2 – 2I1 – 2I2– 4I3= 0 3) 2 – I1 – 4 – 2I2= 0 4) I3 – 4 – 2I2 + 6= 0 5) 2 – I1 – 3I3– 6= 0 Which of the equations is valid for the circuit below?

  29. 1  I2 2  6 V 2 V 2 V 4 V I3 I1 1  3  ConcepTest 26.12 MoreKirchhoff’s Rules 1) 2 – I1 – 2I2 = 0 2) 2 – 2I1 – 2I2– 4I3= 0 3) 2 – I1 – 4 – 2I2 = 0 4) I3 – 4 – 2I2 + 6= 0 5) 2 – I1 – 3I3– 6= 0 Which of the equations is valid for the circuit below? Eq. 3 is valid for the left loop: The left battery gives +2 V, then there is a drop through a 1 W resistor with current I1 flowing. Then we go through the middle battery (but from + to – !), which gives –4 V. Finally, there is a drop through a 2 W resistor with current I2.

  30. 26-4 Series and Parallel EMFs; Battery Charging EMFs in series in the same direction: total voltage is the sum of the separate voltages.

  31. 26-4 Series and Parallel EMFs; Battery Charging EMFs in series, opposite direction: total voltage is the difference, but the lower-voltage battery is charged.

  32. 26-4 Series and Parallel EMFs; Battery Charging EMFs in parallel only make sense if the voltages are the same; this arrangement can produce more current than a single emf.

  33. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) When the switch is closed, the capacitor will begin to charge. As it does, the voltage across it increases, and the current through the resistor decreases.

  34. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) To find the voltage as a function of time, we write the equation for the voltage changes around the loop: Since Q = dI/dt, we can integrate to find the charge as a function of time:

  35. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) The voltage across the capacitor is VC = Q/C: The quantity RC that appears in the exponent is called the time constant of the circuit:

  36. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) The current at any time t can be found by differentiating the charge:

  37. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) Example 26-11: RC circuit, with emf. The capacitance in the circuit shown is C = 0.30 μF, the total resistance is 20 kΩ, and the battery emf is 12 V. Determine (a) the time constant, (b) the maximum charge the capacitor could acquire, (c) the time it takes for the charge to reach 99% of this value, (d) the current I when the charge Q is half its maximum value, (e) the maximum current, and (f) the charge Q when the current I is 0.20 its maximum value.

  38. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) If an isolated charged capacitor is connected across a resistor, it discharges:

  39. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) Once again, the voltage and current as a function of time can be found from the charge: and

  40. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) Example 26-12: Discharging RC circuit. In the RC circuit shown, the battery has fully charged the capacitor, so Q0 =CE. Then at t = 0 the switch is thrown from position a to b. The battery emf is 20.0 V, and the capacitance C = 1.02 μF. The current I is observed to decrease to 0.50 of its initial value in 40 μs. (a) What is the value of Q, the charge on the capacitor, at t = 0? (b) What is the value of R? (c) What is Q at t = 60 μs?

  41. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) Conceptual Example 26-13: Bulb in RC circuit. In the circuit shown, the capacitor is originally uncharged. Describe the behavior of the lightbulb from the instant switch S is closed until a long time later.

  42. 26-5 Circuits Containing Resistor and Capacitor (RC Circuits) Example 26-14: Resistor in a turn signal. Estimate the order of magnitude of the resistor in a turn-signal circuit.

  43. 26-6 Electric Hazards Most people can “feel” a current of 1 mA; a few mA of current begins to be painful. Currents above 10 mA may cause uncontrollable muscle contractions, making rescue difficult. Currents around 100 mA passing through the torso can cause death by ventricular fibrillation. Higher currents may not cause fibrillation, but can cause severe burns. Household voltage can be lethal if you are wet and in good contact with the ground. Be careful!

  44. 26-7 Ammeters and Voltmeters An ammeter measures current; a voltmeter measures voltage. Both are based on galvanometers, unless they are digital. The current in a circuit passes through the ammeter; the ammeter should have low resistance so as not to affect the current.

  45. 26-7 Ammeters and Voltmeters A voltmeter should not affect the voltage across the circuit element it is measuring; therefore its resistance should be very large.

  46. 26-7 Ammeters and Voltmeters An ohmmeter measures resistance; it requires a battery to provide a current.

  47. 26-7 Ammeters and Voltmeters Summary: An ammeter must be in series with the current it is to measure; a voltmeter must be in parallel with the voltage it is to measure.

  48. 26-7 Ammeters and Voltmeters Example 26-17: Voltage reading vs. true voltage. Suppose you are testing an electronic circuit which has two resistors, R1 and R2, each 15 kΩ, connected in series as shown in part (a) of the figure. The battery maintains 8.0 V across them and has negligible internal resistance. A voltmeter whose sensitivity is 10,000 Ω/V is put on the 5.0-V scale. What voltage does the meter read when connected across R1, part (b) of the figure, and what error is caused by the finite resistance of the meter?

  49. Summary of Chapter 26 • A source of emf transforms energy from some other form to electrical energy. • A battery is a source of emf in parallel with an internal resistance. • Resistors in series:

  50. Summary of Chapter 26 • Resistors in parallel: • Kirchhoff’s rules: • Sum of currents entering a junction equals sum of currents leaving it. • Total potential difference around closed loop is zero.

More Related