1 / 14

ECE 342 Solid-State Devices & Circuits 13. Emitter and Source Followers

ECE 342 Solid-State Devices & Circuits 13. Emitter and Source Followers. Jose E. Schutt-Aine Electrical & Computer Engineering University of Illinois jschutt@emlab.uiuc.edu. Emitter Follower. Emitter Follower High-Frequency . Exact analysis is too tedious  approximate.

gema
Télécharger la présentation

ECE 342 Solid-State Devices & Circuits 13. Emitter and Source Followers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 342 Solid-State Devices & Circuits 13. Emitter and Source Followers Jose E. Schutt-Aine Electrical & Computer Engineering University of Illinois jschutt@emlab.uiuc.edu

  2. Emitter Follower

  3. Emitter Follower High-Frequency Exact analysis is too tedious  approximate

  4. Emitter Follower

  5. High-Frequency Analysis of Emitter Follower leads to: 

  6. High-Frequency Analysis of Emitter Follower

  7. Source Follower with Active Load • Characteristics • Provides a buffer stage • M1 is amplifying stage • M2 is active load

  8. Source Follower – Incremental Model

  9. Source Follower – High Frequency Since the source-to-substrate voltage for M1 varies, the body effect for that transistor must be included

  10. Source Follower – High Frequency Modified high-frequency model

  11. Source Follower – Frequency Response

  12. Emitter Follower with Active Load (current mirror) Emitter follower can be used to drive a low-impedance load

  13. Emitter Follower with Active Load Midband gain:

  14. Emitter Follower with Active Load • AC Properties • Gain is less than 1 and near 1 for typical element values • Frequency response has one zero and two poles • Exact frequency response is difficult  Use SPICE • Output stage of NPN current mirror serves as high impedance load at emitter of Q1

More Related