1 / 9

Chapter 10S – Acceptance Sampling

Chapter 10S – Acceptance Sampling. Definition, purpose, sampling plans, operating characteristic curve, AQL, LTPD, risks. Acceptance Sampling. Form of inspection applied to lots or batches Before or after a process, not during the process

ramona
Télécharger la présentation

Chapter 10S – Acceptance Sampling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 10S – Acceptance Sampling Definition, purpose, sampling plans, operating characteristic curve, AQL, LTPD, risks SJSU Bus. 140 - David Bentley

  2. Acceptance Sampling • Form of inspection applied to lots or batches • Before or after a process, not during the process • Purpose: determine whether lot satisfies predetermined standards SJSU Bus. 140 - David Bentley

  3. Sampling Plans • Plan defines: • Lot size • Sample size • Number of samples • Acceptance/rejection criteria SJSU Bus. 140 - David Bentley

  4. Single-sampling Plans • One random sample from each lot • Every item in sample inspected and classified: good or bad • If number of defects (bad) > specified limit, lot is rejected SJSU Bus. 140 - David Bentley

  5. Double-sampling Plans • Upper and lower defect limits set for each lot • Results of initial sample • Defects ≤ lower limit: lot accepted • Defects ≥ higher limit: lot rejected • Defects between two limits: take 2nd sample • If 2nd sample needed, compare number of defects from both samples to third value • If number of defects (bad) > specified value, lot is rejected SJSU Bus. 140 - David Bentley

  6. Multiple-sampling Plans • More than 2 samples • 2 limits specified for each sample • Cumulative number of defects compared to limits for each successive sample • Defects ≤ lower limit: lot accepted • Defects ≥ higher limit: lot rejected • Defects between two limits: continue sampling SJSU Bus. 140 - David Bentley

  7. 1 0.9 0.8 0.7 0.6 Probability of accepting lot 0.5 0.4 0.3 0.2 3% 0.1 0 0 .05 .10 .15 .20 .25 Lot quality (fraction defective) Operating characteristic curveStevenson, William J., Operations Management, 8th Edition (mod. 09/15/04 DAB) • Shows probabilities of accepting lots with various defect fractions SJSU Bus. 140 - David Bentley

  8. Acceptance Levels • Acceptable Quality Level (AQL) • Customers may be willing to accept lots containing less than a specified % defects • Lot Tolerance Percent Defective (LTPD) • Upper limit of defects tolerated in accepted lots SJSU Bus. 140 - David Bentley

  9. Type I and Type II Errors • Type I (producer’s risk) • Conclusion: non-randomness is present and the process is out of control • Action: stop the process which was OK • Reality: randomness is present and the process is in control • Type II (consumer’s risk) • Conclusion: randomness is present and the process is in control • Action: don’t stop the process; continue making defects • Reality: non-randomness is present and the process is out of control SJSU Bus. 140 - David Bentley

More Related