1 / 56

Chapter 6

Chapter 6. Production. Introduction. Production decisions of a firm are similar to consumer decisions Can also be broken down into three steps: Production Technology Describe how inputs can be transformed into outputs Inputs: land, labor, capital and raw materials

shelagh
Télécharger la présentation

Chapter 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6 Production

  2. Introduction • Production decisions of a firm are similar to consumer decisions • Can also be broken down into three steps: • Production Technology • Describe how inputs can be transformed into outputs • Inputs: land, labor, capital and raw materials • Outputs: cars, desks, books, etc. Chapter 6

  3. Production Decisions of a Firm • Cost Constraints • Firms must consider pricesof labor, capital and other inputs • Firms want to minimize total production costs partly determined by input prices 3. Input Choices • Given input prices and production technology, the firm must choose how much of each input to use in producing output Chapter 6

  4. The Technology of Production • Production Function: • Indicates the highest output (q) that a firm can produce for every specified combination of inputs • For simplicity, we will consider only labor (L) and capital (K) • Shows what is technically feasible when the firm operates efficiently Chapter 6

  5. The Technology of Production • The production function for two inputs: q = F(K,L) • Output (q) is a function of capital (K) and labor (L) • The production function is true for a given technology • If technology increases, more output can be produced for a given level of inputs Chapter 6

  6. Production: One Variable Input • We will begin by looking at the short run when only one input can be varied • We assume capital is fixed and labor is variable • Output can only be increased by increasing labor • Must know how output changes as the amount of labor is changed (Table 6.1) Chapter 6

  7. The Technology of Production • Short Run • Period of time in which quantities of one or more production factors cannot be changed • These inputs are called fixed inputs • Long Run • Amount of time needed to make all production inputs variable • Short run and long run are not time specific Chapter 6

  8. Production: One Variable Input Chapter 6

  9. Production: One Variable Input • Observations: • When labor is zero, output is zero as well • With additional workers, output (q) increases up to 8 units of labor • Beyond this point, output declines • Increasing labor can make better use of existing capital initially • After a point, more labor is not useful and can be counterproductive Chapter 6

  10. Production: One Variable Input • Average product of Labor - Output per unit of a particular product • Measures the productivity of a firm’s labor in terms of how much, on average, each worker can produce Chapter 6

  11. Production: One Variable Input • Marginal Product of Labor – additional output produced when labor increases by one unit • Change in output divided by the change in labor Chapter 6

  12. Production: One Variable Input Chapter 6

  13. Production: One Variable Input • We can graph the information in Table 6.1 to show • How output varies with changes in labor • Output is maximized at 112 units • Average and Marginal Products • Marginal Product is positive as long as total output is increasing • Marginal Product crosses Average Product at its maximum Chapter 6

  14. D 112 Total Product C 60 B A Production: One Variable Input Output per Month At point D, output is maximized. Labor per Month 0 1 2 3 4 5 6 7 8 9 10 Chapter 6

  15. Marginal Product E Average Product Labor per Month 0 1 2 3 4 5 6 7 8 9 10 Production: One Variable Input Output per Worker • Left of E: MP > AP & AP is increasing • Right of E: MP < AP & AP is decreasing • At E: MP = AP & AP is at its maximum • At 8 units, MP is zero and output is at max 30 20 10 Chapter 6

  16. Product Curves • We can show a geometric relationship between the total product and the average and marginal product curves • Slope of line from origin to any point on the total product curve is the average product • At point B, AP = 60/3 = 20 which is the same as the slope of the line from the origin to point B on the total product curve Chapter 6

  17. C 20 60 B 1 10 9 0 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 Labor Labor Product Curves AP is slope of line from origin to point on TP curve q q/L 112 TP 30 AP 10 MP Chapter 6

  18. Product Curves • Geometric relationship between total product and marginal product • The marginal product is the slope of the line tangent to any corresponding point on the total product curve • For 2 units of labor, MP = 30/2 = 15 which is slope of total product curve at point A Chapter 6

  19. q q 112 30 60 AP 30 10 A MP 0 1 2 3 4 5 6 7 8 9 10 Labor Product Curves MP is slope of line tangent to corresponding point on TP curve TP 15 10 9 0 2 3 4 5 6 7 8 1 Labor Chapter 6

  20. Production: One Variable Input • From the previous example, we can see that as we increase labor the additional output produced declines • Law of Diminishing Marginal Returns: As the use of an inputincreases with other inputs fixed, the resulting additions to output will eventually decrease…..applies only in short run when 1 variable fixed Chapter 6

  21. Law of Diminishing Marginal Returns • Assumes a constant technology • Changes in technology will cause shifts in the total product curve • More output can be produced with same inputs • Labor productivity (output per laborer) can increase if there are improvements in technology, even though any given production process exhibits diminishing returns to labor Chapter 6

  22. C O3 B A O2 O1 Labor per time period 0 1 2 3 4 5 6 7 8 9 10 The Effect of Technological Improvement Moving from A to B to C, labor productivity is increasing over time Output 100 50 Chapter 6

  23. END OF LECTURE 1!!!!!!!!!!!!!!!!!!! Chapter 6

  24. Labor Productivity • Macroeconomics are particularly concerned with labor productivity • The average product of labor for an entire industry or the economy as a whole • Links macro- and microeconomics • Can provide useful comparisons across time and across industries Chapter 6

  25. Labor Productivity • Link between labor productivity and standard of living • Consumption can increase only if productivity increases • Growth of Productivity • Growth in stock of capital – total amount of capital available for production • Technological change – development of new technologies that allow factors of production to be used more efficiently Chapter 6

  26. Production: Two Variable Inputs • Firm can produce output by combining different amounts of labor and capital • In the long run, capital and labor are both variable • We can look at the output we can achieve with different combinations of capital and labor – Table 6.4 Chapter 6

  27. Production: Two Variable Inputs Chapter 6

  28. Production: Two Variable Inputs • The information can be represented graphically using isoquants • Curves showing all possible combinations of inputs that yield the same output • Curves are smooth to allow for use of fractional inputs • Curve 1 shows all possible combinations of labor and capital that will produce 55 units of output Chapter 6

  29. E 5 Capital per year 4 3 A B C 2 q3 = 90 D q2 = 75 1 q1 = 55 1 2 3 4 5 Labor per year Isoquant Map Ex: 55 units of output can be produced with 3K & 1L (pt. A) OR 1K & 3L (pt. D) Chapter 6

  30. Production: Two Variable Inputs • Diminishing Returns to Labor with Isoquants • Holding capital at 3 and increasing labor from 0 to 1 to 2 to 3 • Output increases at a decreasing rate (0, 55, 20, 15) illustrating diminishing marginal returns from labor in the short run and long run Chapter 6

  31. Production: Two Variable Inputs • Diminishing Returns to Capital with Isoquants • Holding labor constant at 3 increasing capital from 0 to 1 to 2 to 3 • Output increases at a decreasing rate (0, 55, 20, 15) due to diminishing returns from capital in short run and long run Chapter 6

  32. E 5 Capital per year 4 3 A B C 2 q3 = 90 D q2 = 75 1 q1 = 55 1 2 3 4 5 Labor per year Diminishing Returns Increasing labor holding capital constant (A, B, C) OR Increasing capital holding labor constant (E, D, C) Chapter 6

  33. Production: Two Variable Inputs • Substituting Among Inputs • Companies must decide what combination of inputs to use to produce a certain quantity of output • There is a trade-off between inputs, allowing them to use more of one input and less of another for the same level of output Chapter 6

  34. Production: Two Variable Inputs • Substituting Among Inputs • Slope of the isoquant shows how one input can be substituted for the other and keep the level of output the same • The negative of the slope is the marginal rate of technical substitution (MRTS) • Amount by which the quantity of one input can be reduced when one extra unit of another input is used, so that output remains constant Chapter 6

  35. Production: Two Variable Inputs • The marginal rate of technical substitution equals: Chapter 6

  36. Production: Two Variable Inputs • As labor increases to replace capital • Labor becomes relatively less productive • Capital becomes relatively more productive • Need less capital to keep output constant Chapter 6

  37. 2 1 1 1 Q3 =90 2/3 1 1/3 Q2 =75 1 Q1 =55 Marginal Rate ofTechnical Substitution Capital per year 5 Negative Slope measures MRTS; MRTS decreases as move down the indifference curve 4 3 2 1 Labor per month 1 2 3 4 5 Chapter 6

  38. MRTS and Isoquants • We assume there is diminishing MRTS • Increasing labor in one unit increments from 1 to 5 results in a decreasing MRTS from 1 to 1/2 • Diminishing MRTS occurs because of diminishing returns and implies isoquants are convex • There is a relationship between MRTS and marginal products of inputs Chapter 6

  39. MRTS and Marginal Products • If we increase labor and decrease capital to keep output constant, we can see how much the increase in output is due to the increased labor • Amount of labor increased times the marginal productivity of labor: Chapter 6

  40. MRTS and Marginal Products • Similarly, the decrease in output from the decrease in capital can be calculated • Decrease in output from reduction of capital times the marginal produce of capital: Chapter 6

  41. MRTS and Marginal Products • If we are holding output constant, the net effect of increasing labor and decreasing capital must be zero • Using changes in output from capital and labor we can see: Chapter 6

  42. MRTS and Marginal Products • Rearranging equation, we can see the relationship between MRTS and MPs Chapter 6

  43. Isoquants: Special Cases • Two extreme cases show the possible range of input substitution in production • Perfect substitutes • MRTS is constant at all points on isoquant • Same output can be produced with a lot of capital or a lot of labor or a balanced mix Chapter 6

  44. A B C Q1 Q2 Q3 Perfect Substitutes Capital per month Same output can be reached with mostly capital or mostly labor (A or C) or with equal amount of both (B) Labor per month Chapter 6

  45. Isoquants: Special Cases • Perfect Complements • Fixed proportions production function • The output can be made with only a specific proportion of capital and labor • Cannot increase output unless increase both capital and labor in that specific proportion Chapter 6

  46. Q3 C Q2 B Q1 K1 A L1 Fixed-ProportionsProduction Function Capital per month Same output can only be produced with one set of inputs. Labor per month Chapter 6

  47. 120 A 100 B 90 80 40 Labor 250 500 760 1000 Isoquant Describing theProduction of Wheat Point A is more capital-intensive, and B is more labor-intensive. Capital Output = 13,800 bushels per year Chapter 6

  48. Returns to Scale • How does a firm decide, in the long run, the best way to increase output? • Can change the scale of production by increasing all inputs in proportion • If double inputs, output will most likely increase but by how much? Chapter 6

  49. Returns to Scale • Rate at which output increases as inputs are increased proportionately • Increasing returns to scale • Constant returns to scale • Decreasing returns to scale Chapter 6

  50. Returns to Scale • Increasing returns to scale: output more than doubles when all inputs are doubled • Larger output associated with lower cost (cars) • One firm is more efficient than many (utilities) • The isoquants get closer together Chapter 6

More Related