SlideServe
Menu
Préférences
© SlideServe · v2026

Analog-to-Digital Conversion

rufus avatar
23 diapositives · 1.3K Views · Sep 01, 2014

Analog-to-Digital Conversion. PAM(Pulse Amplitude Modulation) PCM(Pulse Code Modulation). PAM(Pulse Amplitude Modulation). Conversion of analog signal to a pulse type signal where the amplitude of signal denotes the analog information Two class of PAM signals Natural sampling (gating)

Analog-to-Digital Conversion - slide 1
01 / 23Analog-to-Digital Conversion
1 / 17

Télécharger la présentation

Analog-to-Digital Conversion
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Analog-to-Digital Conversion PAM(Pulse Amplitude Modulation) PCM(Pulse Code Modulation)

  2. PAM(Pulse Amplitude Modulation) • Conversion of analog signal to a pulse type signal where the amplitude of signal denotes the analog information • Two class of PAM signals • Natural sampling (gating) • Easier to generate • Instantaneous sampling • Flat-top pulse • More useful to conversion to PCM

  3. W(t) Ws(t) t t S(t) Analog bilateral switch Ts  Ws(t) =W(t)S(t) W(t) t Duty Cycle D=/Ts=1/3 S(t) PAM with natural sampling

  4. |W(f)| 1 f |Ws(f)| -B B D=1/3 -3fs -2fs -fs -B B fs 2fs 3fs Spectrum of PAM with natural sampling • Spectrum of input analog signal • Spectrum of PAM • D=1/3, fs=4B • BT= 3fs = 12B

  5. W(t) Ws(t) t t  S(t) Ts t PAM with flat-top sampling Sample and Hold

  6. |W(f)| 1 |Ws(f)| f D=1/3 -B B -3fs -2fs -fs -B B fs 2fs 3fs Spectrum of PAM with flat-top sampling • Spectrum of Input • Spectrum of PAM • /Ts=1/3, fs=4B • BT= 3fs = 12B

  7. Summary of PAM • Require very wide bandwidth • Bad noise performance • Not good for long distance transmission • Provide means for converting a analog signal to PCM signal • Provide means for TDM(Time Division Multiplexing) • Information from different source can be interleaved to transmit all of the information over a single channel

  8. PCM(Pulse Code Modulation) • Definition • PCM is essentially analog to digital conversion of a signal type where the information contained in the instantaneous samples of an analog signal is represented by digital words in a serial bit stream • Analog signal is first sampled at a rate higher than Nyquist rate, and then samples are quantized • Uniform PCM : Equal quantization interval • Nonuniform PCM : Unequal quantization interval

  9. Why PCM is so popular ? • PCM requires much wider bandwidth • But, • Inexpensive digital circuitry • PCM signal from analog sources(audio, video, etc.) may be merged with data signals(from digital computer) and transmitted over a common high-speed digital communication system (This is TDM) • Regeneration of clean PCM waveform using repeater. • But, noise at the input may cause bit errors in regenerated PCM output signal • The noise performance is superior than that of analog system. • Further enhanced by using appropriate coding techniques

  10. Bandlimited Analog signal Flat-top PAM signal Analog signal LPF BW=B Sampler & Hold Encoder Quantizer No. of levels=M Quantized PAM signal PCM signal Channel, Telephone lines with regenerative repeater Decoder Reconstruction LPF PCM signal Quantized PAM signal Analog Signal output PCM transmitter/receiver

  11. Waveforms in PCM Uniform quantizer Error signals Waveform of signals PCM signal PCM word

  12. Encoder • Usually Gray code is used • Only one bit change for each step change in quantized level • Single errors in received PCM code word will cause minimum error if sign bit is not changed • In text, NBC(Natural Binary Coding) is used • Multilevel signal can be used • Much smaller bandwidth than binary signals • Requires multilevel circuits

  13. Uniform distribution Xmax -Xmax x Distortion x -/2 /2 x Uniform PCM • Let M=2n is large enough =2Xmax/M

  14. SQNR of PCM • Distortion • SQNR • Let normalized input :

  15. Bandwidth of PCM • Hard to analyze because PCM is nonlinear • Bandwidth of PCM • If sinc function is used to generate PCM • , where R is bit rate • If rectangular pulse is used • , first null bandwidth • If fs=2B (Nyquist sampling rate) • Lower bound of BW: • In practice, is closer to reality

  16. Performance of PCM Quantizer Level, M 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384 32768 65536 n bits M=2n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Bandwidth >nB 2B 4B 6B 8B 10B 12B 14B 16B 18B 20B 22B 24B 26B 28B 30B 32B SQNR|dB_PK 4.8+6n 10.8 16.8 22.8 28.9 34.9 40.9 46.9 52.9 59.0 65.0 71.0 77.0 83.0 89.1 95.1 101.1

  17. PCM examples • Telephone communication • Voice frequency : 300 ~ 3400Hz • Minimum sampling frequency = 2 x 3.4KHz = 6.8KHz • In US, fs = 8KHz is standard • Encoding with 7 information bits + 1 parity bit • Bit rate of PCM : R = fs x n = 8K x 8 = 64 Kbits/s • Buad rate = 64Ksymbols/s = 64Kbps • Required Bandwidth of PCM • If sinc function is used: B > R/2 = 32KHz • If rectangular is used: B = R = 64KHz • SQNR|dB_PK = 46.9 dB (M = 27) • Parity does not affect quantizing noise but decrease errors caused by channels

  18. PCM examples • CD (Compact Disk) • For each stereo channel • 16 bit PCM word • Sampling rate of 44.1KHz • Reed-Solomon coding with interleaving to correct burst errors caused by scratches and fingerprints on CD • High quality than telephone communication

  19. Homework • Illustrative Problems • 4.9, 4.10, 4.11, 4.12 • Problems • 4.14

  20. PCM with Uniform Quantization Compression (Nonlinear) filter Analog Input PCM output Nonuniform quantization • Example: Voice analog signal • Peak value(1V) is less appears while weak value(0.1V, 20dB down) around 0 is more appears (nonuniform amplitude distribution) • Thus nonuniform quantization is used • Implementation of nonuniform quantization

  21. Nonuniform Quantization • Two types according to compression filter • -law : used in US • See Figure 4.9, Page 155 • A-law : used in Europe

  22. Nonuniform Quantization • Compandor = Compressor + Expandor • Compressor: Compression filter in transmitter • Expander: Inverse Compression filter in receiver • -law : • SQNR • Uniform quantizing: • -law: • A-law:

  23. Homework • Illustrative Problems • 4.13, 4.14 • Problems • 4.17