Panasonic Communications CO.,LTD. - PowerPoint PPT Presentation

slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Panasonic Communications CO.,LTD. PowerPoint Presentation
Download Presentation
Panasonic Communications CO.,LTD.

play fullscreen
1 / 127
Panasonic Communications CO.,LTD.
506 Views
Download Presentation
seamus
Download Presentation

Panasonic Communications CO.,LTD.

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. New Hybrid IP PBX KX-TDA30 MPR 4.00 Panasonic Communications CO.,LTD.

  2. TDA100/200 Ver.1.0, 1.1 TDA30 Ver.1.0 TDA100/200 Ver.2.0 TDA30 Ver.2.01 TDA600 TDA100/200 Ver.2.02 TDA600 Ver.2.03 TDA100/200 MPR 3.2 TDA30 MPR 4.0 “ Hybrid IP-PBX KX-TDA Series Product Line Up Project Name Main Function Ver.1.0 QSIG, Call Center, VoIP Gateway, CTI (CSTA/TAPI) , T76xx Line Up Ver.1.1 Digital XDP, DECT CS to D-PT Port. Ver.2.0 IP-Ext. (only TDA100/200), Hotel Features, TVM Ver.2.01 SVM (Simplified Voice Message) for TDA30 Ver.2.02 GSM Integration, Improve network feature. (MPR 3.00) Ver.2.03 PDN/SDN (TDA600 MPR 3.10) MPR 3.2 PDN/SDN Feature (TDA100/200), KX-TDA0177 (CSLC-16) TDA30 MPR 4.00 • SIP Trunk (8-ch) • IP-Extension (4-ch) • CTI connection by IP-G/W-4 (Software up grade) • 5 digits numbering

  3. Enhancement Features of TDA30 MPR 4.0 Option Requirement TDA30 MPR 4.0 New Feature Enhancement Support KX-TDA3450 (SIP G/W card) - 4ch= KX-TDA3450. 8ch KX-TDA3450+KX-TDA3451 - Support KX-TDA3470 (IP-Extension card) - 4ch for NT-136, NT-265, NT-300 (Plan) - CTI Link function by KX-TDA3480 (IP-G/W-4) - CTI connection, PC programming, IP-G/W. function. -

  4. No No No No No No No No “ Enhancement Features of TDA30 MPR 4.0 Option Requirement - The same features as TDA100 MPR 3.2 TRS Function Improvement - Independent TRS table 2-6 Music On Hold by DDI/DIL tenant base - MPR.3.0: Extension tenant base. Caller ID notification when VM transfer - MPR.3.0: The caller ID is not sent to the VM. Call Log on Busy Extension (Busy/FWD-All) - MPR.3.0: No-Answer Call Log only on free extension. D-PT Disconnect/Re-connect status to SMDR. - When a D-PT is unplugged/plugged, the status is recorded to SMDR. Incoming call log for answered ICD group call - Answered ICD group call is logged in the ICD-Group call log button. Intercept routing for extension calls - Intercept routing works for extension calls (as well as CO calls). Alternative intercept busy destination - Default intercept busy destination can be programmed.

  5. No No No No No No No “ Enhancement Features of TDA30 MPR 4.0 Option Requirement - The same features as TDA100 MPR 3.2 Independent Intercept no answer timer for extension - Every extension have an IRNA timer for day, lunch, break and night. Intercept destination for each DISA (No Dial) - Destination DISA AA-0”, DISA AA-9”, “Operator” or “Disconnect” Intercept destination for each DISA (DISA Busy) - Destination DISA AA-0”, DISA AA-9”, “Operator” or “Disconnect” Walking Extension for IP-Soft phone, IP-Extension Walking COS changes CLIP number. - One extension wants to have several CLIP. 5-Digits extension numbering - TDA600 Ver.2.01 support. Automatic Call Waiting for Extension call - Without BSS operation the automatic call waiting function can be performed.

  6. No No No No No “ Enhancement Features of TDA30 MPR 4.0 CTI Improvements Option Requirement - The same Improvements as TDA100 MPR 3.2 Retrieve operation using CTI application. - Retrieve by CTI application → Handset is activated. Dialing information before ARS modification. - Remove PIN code from the dialling information/data. Speed dial name is informed to CTI application. Network Connection Improvements Option Requirement - The same Improvements as TDA100 MPR 3.2 CLIP Modification - Incoming CLIP 012345 → Outgoing CLIP 12345. Caller-ID Modification Table - CLIP Modification table or Caller-ID modification table.

  7. No No No No No No “ Enhancement Features of TDA30 MPR 4.0 Option Requirement PC Maintenance Console (PCMC) Improvements Key Label (PT/DSS Console) Name Print out Function - Edit / Print out / Save to file. Russian PCMC menu is supported - The same Improvements as TDA100 MPR 3.2 Same numbering plan in quick dial entry. - Automatic rerouting function works over Ext. numberingtype network too. PCMC supports “T”, “P” and “W” for analogue modem. - “T” = Switch Pulse to DTMF, “P”= Pause, “W”=Wait The Profile Setup menu is moved - “Toll” → “Connect”. Hide Password (Batch mode) - DSYS BR, CN, RU, UA, NE-SP Version, hide the system password.

  8. Option Requirement No No No No “ Enhancement Features of TDA30 MPR 4.0 Modification of Un-specified operation - The same modification as TDA100 MPR 3.2 All QSIG lines become busy by TIE call. - Common extension numbering function (TIE call) with QSIG line. Error code 050. - Delete the error code 050 (Error code of the centralized VM function) Centralized VM function does not work over QSIG. - If CF/CT on QSGI is set to enable. System reset by CTI application. - If SXDP-PS number is accessed by CTI application.

  9. Support KX-TDA3450 SIP G/W card

  10. KX-TDA3450 (SIP-G/W card) -1 KX-TDA30 supports communication with SIP protocol, installing SIP-GW4 card. Note : NOT hot swappable KX-TDA3451 (additional 4ch) 1 Cards/KX-TDA30 1 Cards/KX-TDA15 KX-TDA3450 (4ch Main Card) Available Functions : Make/Receive Calls, Caller ID, DDI - CODEC : ITU-T G.729a/b, G.711 - Protocol : RFC3261, 3262, 3264, 3311, 4028 - Programming : web programming (for SIP-GW4)

  11. ITSP ISP Internet Local Telephone “ KX-TDA3450 (SIP-G/W card) - 2 SIP-GW4 Connection Outline LAN WAN Data Circuit Terminating Equipment (e.g., ADSL Modem) Exclusively for maintenance of the SIP-GW Card

  12. KX-TDA3450 (SIP-G/W card) - 3 Please do not offer SIP Card to end user, without PCC approval. How to proceed PCC approval Open SIP account * * 2 accounts and telephone number for PSTN call. One day test (By PCC) Simple Interoperability Test at the site. (Take IP Trace data) PCC checks the data Field Trial at the end user. (One month) (Take IP Trace data) PCC checks the data PCC Approves the SIP provider

  13. PCC check the account info briefly. PCC reply to Sales Company with SIP-GW4 config. PCC analyses the IOT result and decide starting FT or not. Sales Company start SIP IOT* using config which PCC informed. Sales Company reply to PCC the test result and captured data. Sales Company start Field Trial for 20 working days. Sales Company reports to PCC the FT result. Discuss with PCC sales about new provider.Getting 2 accounts for interoperability testing. “ KX-TDA3450 (SIP-G/W card) - 4 SIP Interoperability Testing (SIP-IOT * ) plan. PCC needs your support for following purple color part. Account Info 1 day account check SIP IOT IOT Result Analysis FT Login name and password is also required for web management interface. This information may not be available if account management can only be done by ITSP.

  14. Local Telephone ProxyServer RegistrarServer PSTN DSL modem Router VoIP provider Internet Telephony Service provider SIP Phone Account 1. Account 2. - User ID: xxxx - Password: xxxx - Proxy Server: xxxx - Registrar Server: xxxx ( Sometimes Registrar Server is same with Proxy Server) - Telephone Number: xxxx - User ID: xxxx - Password: xxxx - Proxy Server: xxxx - Registrar Server: xxxx ( Sometimes Registrar Server is same with Proxy Server) - Telephone Number: xxxx “ “ KX-TDA3450 (SIP-G/W card) - 5 Two accounts information are needed for the testing!

  15. KX-TDA3450 (SIP-G/W card) - 6 Programming Screen (Slot)

  16. Main Card Optional Card Port 1 to 4 = Main Card Port 5 to 8 = Optional Card “ KX-TDA3450 (SIP-G/W card) - 7 SIP-G/W Prot Property

  17. Port 1 to 4 = Main Card Port 5 to 8 = Optional Card “ KX-TDA3450 (SIP-G/W card) - 8 CO Line Setting for SIP G/W

  18. Default: DIL If the SIP provider supports DDI service, please change to DDI/DID. Port 1 to 4 = Main Card Port 5 to 8 = Optional Card “ KX-TDA3450 (SIP-G/W card) - 9 DIL Table for SIP-G/W

  19. Support KX-TDA3470 4-IP Extension I/F card.

  20. IP-Extension I/F card (4-ch) - 1 KX-TDA30 supports the connection of IP proprietary telephones (both hard-phone and soft-phone). KX-TDA3470 (4ch Card) KX-TDA3470 1 Card/KX-TDA30 1 Card/KX-TDA15 Physical I/F: 100 Base-T only Note : NOT hot swappable

  21. Max. 4 Extensions KX-NC8100 KX-NT265 KX-NT136 IP-Network “ IP-Extension I/F card (4-ch) - 2 KX-NT300 (Plan) KX-TDA3470

  22. IP-Extension I/F card (4-ch) - 3 Programming Screen (Slot)

  23. IP-Extension I/F card (4-ch) - 4 Programming Screen (Card Property) Same as TDA100/200/600

  24. IP-Extension I/F card (4-ch) - 5 Same as TDA100/200/600 Programming Screen (Port Property) Programming Screen (Registration) Registration: Same Steps as TDA100/200/600

  25. TDA15 TDA30 Trunk Cards BRI-2 KX-TDA3280 - 2 Port ISDN BRI Card - CO/Extension (Programmable) Max.1 Max.3 BRI-1 KX-TDA3283 - 1 Port ISDN BRI Card - CO/Extension (Programmable) Max.1 - LCOT-4 KX-TDA3180 - 4 Port Analog CO Card - RJ-45 x 4 - Max.3 LCOT-2 KX-TDA3183 - 2 Port Analog CO Card - RJ-45 x 2 Max.1 Max.3 IP-GW-4 KX-TDA3480 - 4ch IPGW Card - G729a/G723.1/G711 Max.1 Max.1 SIP-G/W KX-TDA3450 - 4ch SIP-G/W Card Max. 8ch with TDA3451 CODEC G.711 (a-law/u-law) G.729AB Max.1 Max.1 Additional 4ch KX-TDA3451 “ System Hardware -1 Note : All cards for TDA15/TDA30 are NOT hot swappable

  26. TDA15 TDA30 Extension Cards DLC-4 KX-TDA3171 - 4 Port D-PT Card - D-PT / DSS / CS / VM (D-PT) Max.1 Max.1 DLC-8 KX-TDA3172 - 8 Port D-PT Card - D-PT / DSS / CS / VM (D-PT) Max.1 Max.2 SLC-4 KX-TDA3173 - 4 Port SLT Card - 4 DTMF receiver - + 40V Line feed Max.1 Max.1 SLC-8 KX-TDA3174 - 8 Port SLT Card - 8 DTMF receiver - + 40V Line feed Max.1 Max.2 IP-Ext-4 KX-TDA3470 • 4ch IP-Ext. Card KX-NT136 KX-NT265 KX-NCS8100 KX-NT300 (Plan) Max.1 Max.1 “ System Hardware -2 Note : Optional DHLC card is not provided. Note : All cards for TDA15/TDA30 are NOT hot swappable

  27. System Hardware -3 Card Installation Max. 2 cards of any combination of each IP related cards (SIP-GW4, IP-GW4 and IP-EXT4) on any Slot No. 5 – 7.

  28. Maximum Number of Trunk/Terminal Trunks (*) DID card is not available on TDA15 Terminals (**) With additional AC adapter

  29. CTI Link function by IP-G/W-4 CTI connection, PC Maintenance Console by upgrade IP-G/W-4 software

  30. KX-TDA3480 CTI Server PCMC VPN IP-Network “ CTI Link function by IP-G/W card Same Time KX-TDA3480 (Ver1.40)

  31. TRS Function Improvement Independent TRS table 2-6 (The same features as TDA100 MPR 3.2)

  32. 00 01 02 03 04 TRS-2 TRS-3 TRS-4 TRS-5 TRS-6 “ TRS Function Improvement - 1 MPR 3.0 Function Follow Level 2 Follow Level 2,3 Follow Level 2,3,4 Follow Level 2,3,4,5 Follow Level 2,3,4,5,6

  33. TRS Function Improvement - 2 PCMC 4.0 System Programming MPR 3.0 Function MPR 4.0 New Function

  34. 00 00 00 00 00 01 02 03 04 TRS-2 TRS-3 TRS-4 TRS-5 TRS-6 “ TRS Function Improvement - 3 MPR 4.0 New Function Follow this Level only Follow this Level only Follow this Level only Follow this Level only Follow this Level only

  35. TRS Function Improvement - 4 New TRS Sample Programming MPR 4.0 New Function 0 0 0 0 1 2 3 4 01 00 02 03 04

  36. Denied Code Exception Code TRS-2 TRS-3 0 01, 02, 03, 04 TRS-4 0 00 TRS-5 0 TRS-6 0, 1, 2, 3, 4 00 (International) 0 (National) Ext.101 (TRS-2) General manager Ext.102 (TRS-3) National sales manager Ext.103 (TRS-4) International sales manager Ext.104 (TRS-5) Workers-1 (City call only) Ext.105 (TRS-6) Workers-2 (Limited City call only) “ TRS Function Improvement - 5 New TRS Sample Programming MPR 4.0 New Function Allowed Allowed Not Allowed Allowed Allowed Not Allowed Not Allowed Not Allowed Not Allowed Not Allowed

  37. Music On Hold by DDI tenant (The same features as TDA100 MPR 3.2)

  38. Tenant-1:Music on Hold -1 User-G-2 User-G-1 “ Music On Hold by DDI tenant base - 1 MPR 3.0 Function Incoming call to an user group-1 extension, when the call is placed into hold, the TDA connects the Music on Hold-1. Music on Hold Source = Ext. → User-G → Tenant → MOH select Customer request An extension is shared by two companies (Company-A:DDI-1 and Company-B:DDI-2). The customer wishes to send different MOH to caller based on CO-line. Calls to Company-A Calls to Company-B MOH-1 MOH-2

  39. Music On Hold by DDI tenant base - 2 MPR 4.0 Function Music on Hold Source = CO/DDI → Tenant → MOH select Programming

  40. Shared Operator “ Music On Hold by DDI tenant base - 3 MPR 4.0 Function Customer request An extension is shared by two companies (Company-A:DDI-1 and Company-B:DDI-2). The customer wishes to send different MOH to caller based on CO-line. Calls to Company-A DDI-1 (Tenant-1) MOH-1 (Tenant-1) Calls to Company-B DDI-2 (Tenant-2) MOH-2 (Tenant-2)

  41. Caller ID notification VM transfer (The same features as TDA100 MPR 3.2)

  42. Without Caller ID information VM Transfer (Ext.202) ISDN External Call Access the mail box Ext.201 Ext.202 “ Caller ID notification VM transfer - 1 MPR 3.0 Function Message without Caller ID information

  43. With Caller ID information VM Transfer (Ext.202) ISDN External Call Access the mail box Ext.201 Ext.202 “ Caller ID notification VM transfer - 2 MPR 4.0 Function Message with Caller ID information

  44. Call Log on Busy Extension (The same features as TDA100 MPR 3.2)

  45. Ext.201 Free 28 DEC. 01:01 PM THU PROG INFO RING MENU Talking to Ext.202 External Call ISDN 202 MENU Disconnect Ext.201 Ext.202 28 DEC. 01:01 PM THU PROG INFO RING MENU “ Call Log on Busy Extension - 1 MPR 3.0 Function Busy Signal Busy No Call Log

  46. Ext.201 Free 28 DEC. 01:01 PM THU PROG INFO RING MENU Talking to Ext.202 External Call ISDN 202 MENU Disconnect Ext.201 Ext.202 28 DEC. 01:01 PM THU Incoming Call : 001 PROG INFO RING MENU “ Call Log on Busy Extension - 2 MPR 4.0 Function Call Log on Busy/FWD-All Extension. Busy Signal Busy No Optional program Call Log

  47. D-PT Disconnect/Re-connect status (The same features as TDA100 MPR 3.2)

  48. PC Screen Ext.201 OUT Office Ext.202 IN Office Ext.201 Ext.202 “ D-PT Disconnect/Re-connect status - 1 Customer request Status Information to PC via RS232C Disconnect Re-connect Data Covert Software

  49. Slot + Port Disconnect Sales Company Password *PCCKXTDA* Disconnect information Ext.201 “ D-PT Disconnect/Re-connect status - 2 MPR 4.0 Function Disconnect Information 09/01/07 01:57PM MN ALM #329 10704 Data Link failure Status Information Default: Disable

  50. Slot + Port Re-connect Sales Company Password *PCCKXTDA* Ext.201 Re-connect information “ D-PT Disconnect/Re-connect status - 3 MPR 4.0 Function Re-connect Information 09/01/07 01:57PM MN ALM #398 10704 Data Link established Status Information Default: Disable